Monarch Industries engine driven centrifugal pumps

See our on-line Stock Products Catalog for detailed product information on the centrifugal pumps we stock.

 
Monarch Industries ACGF Series

ACGF Series centrifugal pumps
The ACGF Series is excellent for a wide variety of booster, sprayer, fire fighting and sprinkler applications. They are constructed with a rugged cast iron casing, cast iron impeller, Viton and stainless steel mechanical seal.
ENGINE - Internationally known Briggs and Stratton Intek, or Honda engines, with dependable world wide service. All engines are equipped with adjustable throttle controls.
HANDLE - Built-in handle for easy portability. 5.5 & 8 HP models.
DISCHARGE OPENING - Sizes are 1¼" and 2" NPT.
CASING - Thick walled cast iron provides the strength for pressure boosting.
BASE - Stamped steel base protects pump and engine. Facilitates easy and firm mounting.
SEAL - Viton and stainless steel mechanical seal provides excellent corrosion resistance for ag-chemical applications.
IMPELLER - Durable gray iron impeller is enclosed for higher pressure.

 
Monarch Industries NSGF Series

NSGF Series centrifugal pumps
The Monarch NSGF Series of self priming engine driven centrifugal pumps are primarily designed for irrigation and sprayer applications, including ag-chemicals and liquid fertilizers. It is constructed with a rugged self priming cast iron casing, cast iron impeller, Viton and stainless steel mechanical seal and is available with either Briggs & Stratton or Honda engines.
ENGINE - Internationally known Briggs and Stratton or Honda engines, with dependable world wide service. All engines are equipped with adjustable throttle engine controls.
HANDLE - Built-in handle for easy portability.
DISCHARGE OPENING - Sizes are 1½" and 2" NPT.
CASING - Large cast iron casing provides rugged and quick self priming.
BASE - Stamped steel base protects pump and engine. Facilitates easy and firm mounting.
SEAL - Viton and stainless steel mechanical seal provides excellent corrosion resistance for ag fertilizer applications.
IMPELLER - Durable gray iron impeller is enclosed for higher pressure.

 
Monarch Industries Aluminum Series Series

Aluminum Series Series centrifugal pumps
The Water Horse semi-trash aluminum gas drive centrifugal pumps are ideal for general purpose dewatering, where rugged portability is important. Powered by a heavy-duty Honda GX 120 engine with oil alert system, providing extreme reliability.

 
Monarch Industries NG Series

NG Series centrifugal pumps
Close coupled configuration with the pump impeller threading directly onto the engine shaft. This design allows for a very compact product. Rugged cast iron construction makes it an excellent choice for turf or ag-irrigation applications.
ENGINE - Internationally known Briggs and Stratton Vanguard engine equipped with adjustable throttle controls. Equipped with 12 volt electric start and removable 5 gal fuel tank. (less battery & cables)
SEAL - Mechanical seals are self lubricating and have Buna-N bellows with brass and stainless steel hardware. Other seal materials such as Viton and stainless steel or tungsten carbide are available on special order.
IMPELLER - Made of cast iron, are dynamically balanced and are of enclosed design for maximum efficiency.
CASING - Thick walled durable cast iron casing is ideal for high pressure applications.
WEAR RINGS - Wear rings are bronze and are easily replaceable.
SHAFT SLEEVE - Zinc plated shaft sleeves are provided to help protect shaft from corrosion.

 
Monarch Industries TSP Series

TSP Series centrifugal pumps
Fast self priming trash pump series; comparable in weight to aluminum pumps. Ideal for portable trash pumping and hydro-seeding applications. Handles spherical solids up to half the diameter of the suction hose. The pump casing is built of cast ductile iron for durability. Available in 2", 3" & 4" sizes.
ENGINE - A variety of gasoline engines available.
SEAL - Siliconized Graphite corrosion and abrasion resistant, water lubricated, no maintenance required, on a replaceable sleeve, protecting engine shaft.
PRIMING PLUG - Enables priming without the removal of the discharge hose.
DISCHARGE OUTLET - Threaded female NPT.
IMPELLER - Semi-open cast gray iron, two vane type, for higher efficiency, capable of handling spherical solids.
DIFFUSER - Ductile iron, replaceable, with built-in wear plate.
CHECK VALVE - Built-in with threaded NPT suction inlet, prevents syphoning, facilitates priming.
CASING - Rugged ductile iron construction for high impact resistance and long life.
“O” RING SEAL - No gaskets required.
SUCTION STRAINER - Price of pump includes a suction strainer, designed to pass solids of size that can be handled by pump, giving an unobstructed flow.
FRONT COVER - Ductile iron construction - easy removal by four wing nuts, no wrenches required.
DRAIN PLUG - Enables casing to be drained, for winterizing, prevents frost damage.
ROLL FRAME - Sturdy welded roll frame standard on 2" and 3" models only

 
Monarch Industries BSGF Series

BSGF Series centrifugal pumps
The Monarch BSGF Series of self priming engine driven pumps are general purpose pumps designed for liquid transfer and contractor dewatering using a semi open impeller.
ENGINE - Internationally known Briggs and Stratton or Honda engines, with dependable world wide service. All engines are equipped with adjustable throttle engine controls.
CASING - Cast iron; 2" or 3" suction & discharge.
PRIMING & DRAIN PLUGS - ¾", garden hose size.
IMPELLER - 4 vane, semi-open gray cast iron, with "Blind Hole" for engine shaft protection.
SEAL - Self lubricating mechanical seal, carbon-ceramic faces, Viton bellows to resist most ag- chemicals and liquid fertilizers.
BASE - Rugged stamped steel base provides firm easy mounting.
HANDLE - Built-in handle for easy portability.

 
Monarch Industries MIG Series

MIG Series centrifugal pumps
The Monarch MIG Series of heavy duty self priming pumps are of all iron construction and can be used in a wide variety of applications, including industrial and marine installations.
IMPELLER - Semi open cast iron, non clogging, designed for water but can also handle small quantities of mud, sand or silt up to 10% by volume.
PRIMING PLUG - Enables priming, without having to disconnect the discharge piping.
CHECK VALVE - Built-in with threaded NPT suction inlet, prevents syphoning, facilitates priming.
SEAL - Viton and stainless steel with carbon-ceramic faces, mechanical self lubricating, no maintenance required.
CASING - Cast gray iron rugged construction large capacity for faster priming. Self cleaning interior design prevents silt build up.
WEAR PLATE - Replaceable steel wear plate, for maintaining maximum pump efficiency.

Hydraulic Supply Co. is located in Florida and Georgia, and is a distributor for Monarch Industries, a leading manufacturer of centrifugal pumps
See our Company Overview to find out more about us.

Our on-line Stock Products Catalog includes centrifugal pumps and has over 1400 pages of hydraulic, pneumatic and fluid conveying products to choose from - and every one of them is in stock and available for immediate delivery.

Click on “Order On-line” for browsing product categories, checking price and quantity on hand, order entry and much more.

See our Contact Us page to get in touch and get the help you need with your engine driven centrifugal pumps requirement.
 

Related centrifugal pumps pages
centrifugal pumps  electric motor driven centrifugal pumps  irrigation & industrial centrifugal pumps  lawn & turf irrigation centrifugal pumps  frame mount centrifugal pumps