Hydraulic Supply Co. is located in Florida
and Georgia.
See our Company
Overview to find out more about us.
Our on-line Stock
Products Catalogincludes detailed product information on all
of these hydraulic seals and has over 1400 pages of hydraulic, pneumatic and
fluid conveying products to choose from - and every one of them is in
stock and available for immediate delivery.
Click on “Order On-line” for browsing product categories, checking price and quantity on hand, order entry and much more.
See our Contact
Us page to get in touch and get the help you need with your
hydraulic seals
requirement.
Glass filled PTFE for low breakaway and low running friction.
Popular choice of many cylinder manufacturers. Rubber energizer
under seal assures positive contact with the dynamic surfaces.
Piston diameter F dimensions are given for pistons without wear
rings. Material: 15% glass filled PTFE seal with rubber energizer.
Temperature Range: -40°F to 220°F. Pressure Range: 0 to 5,000 PSI.
Material: 15% glass filled PTFE seal. Rubber energizer. Temperature Range: -40°F to 220°F. Pressure Range: 0 to 5,000 PSI. Note: Piston diameter F dimensions are given for pistons
without wear rings.
Molded from high grade poly-esters, 5% glass fiber and 5% PTFE.
Interchangeable with PS1800 seals. Low friction. High resistance to
abrasion & extrusion. The polyurethane material has a high degree of
memory and will stretch over a piston and snap into the groove and
be ready for immediate assembly. Damage during assembly is virtually
eliminated. Piston diameter F dimensions are given for pistons
without wear rings. Material: Glass/PTFE filled polyurethane seal. Rubber
energizer. Temperature Range: -40°F to 220°F. Pressure Range: 0 to 5,000 PSI.
Heavy duty, fabric reinforced seal with two polyacetal L bearings.
Withstands pressures up to 10,000 PSI. L bearings react to pressure
to prevent extrusion and support the piston. For 2-piece pistons.
Material: Fabric reinforced nitrile seal. Polyacetal
anti-extrusion ring. Temperature Range: -22°F to 212°F. Pressure Range: 0 to 10,000 PSI. Maximum Speed: 1.5 ft/sec to 6,000 PSI. 0.5 ft/sec to 10,000
PSI.
This seal is a double-acting piston seal designed to replace
o-rings, quad-rings and T-seals with the same groove dimensions
(o-ring dash number). Style 575 urethane back-up rings may be added
to either or both sides of the PSC to accommodate wider groove
widths. The PSC is made of 95A durometer polyurethane, giving it
high extrusion and abrasion resistance. The crowned sealing surface
produces a positive seal from vacuum to high pressure. Material: 95A polyurethane seal, 70A nitrile energizer. Temperature Range: -65°F to 220°F. Pressure Range: 0 to 5,000 PSI.
Molded from 93 Shore A polyurethane with a 70 Shore A energizer,
this seal utilizes the same groove dimensions as a standard o-ring
or T-seal. One or two Style 575 back-up rings may be used for wider
grooves. Extrusion resistant by design, this seal also is resistant
to rolling and twisting. Installation is an easy 2-step snap-in
procedure with no need to re-size before insertion into the bore.
Material: 93A urethane seal, 70A nitrile energizer. Temperature Range: -65°F to 220°F. Pressure Range: 0 to 5,000 PSI.
These piston seals provide bi-directional, low friction sealing with
increased stability and superior leakage control. The square cut
energizer provides low pressure sealing and eliminates backside
leakage. This seal also effectively seals between different fluids
on each side of the piston seal, making gas/liquid sealing
combinations possible. Material: 40% bronze filled PTFE seal, rubber energizer and
quattro ring. Temperature Range: -40°F to 220°F. Pressure Range: 0 to 5,000 PSI.
