SOLENOID OPERATED HYDRAULIC CONTROL VALVES


























In Stock solenoid operated hydraulic control valves

See our on-line Stock Products Catalog for detailed product information on the following solenoid operated hydraulic control valves we stock.

 
Solenoid-Operated hydraulic control valves

 
Eaton Vickers® Screw-In Cartridge solenoid-operated

Screw-In Cartridge solenoid-operated hydraulic control valves
Poppet and Spool type solenoid actuated valves for applications up to 5000 psi and 60 USgpm

 
Eaton Vickers® DG4V-3S & DG4V-3 solenoid operated

NFPA Size D03 solenoid-operated hydraulic control valves
DG4V-3S Std Performance • Flows to 10.5 GPM
DG4V-3 High Performance • Flows to 21 GPM
Features: High reliability. High pressure & flow capability. Low pressure drops. Viton® seals. Scratch-proof manual override. Coil change with valve in place. ISO 4401 Size 03, NFPA D03 port interface.

 
Eaton Vickers® DG4V-3 Soft Shift solenoid-operated

NFPA Size D03 Soft Shift solenoid-operated hydraulic control valves
DG4V-3 High Performance • Flows to 22 GPM
Non-Tuneable Fixed Orifice
eatures: Low cost alternative to proportional valves. "Non-Tuneable" fixed shift orifices for lower cost. Conventional direct-acting solenoid design with controlled solenoid shift speed. Wet Armature design for quieter operation and long life with no dynamic seal leakage. Molded coil is impervious to moisture & dirt. Viton® seals standard.
Operating Principles: Spools with contoured or notched lands are used to provide maximum control of flow rate change as the spool is shifted. DC solenoids prevent coil burnout during controlled rate of solenoid shift. Spool shift speed is controlled by a fixed, non-serviceable metering orifice in the solenoid.

 
Eaton Vickers®
DG4S4-01 solenoid-operated

NFPA Size D05 solenoid-operated hydraulic control valves
DG4S4-01 60 Series • Flows to 25 GPM
Features: Wet Armature design for quieter operation and long life with no dynamic seal leakage. Molded coil is impervious to moisture & dirt. Buna-N seals standard (Viton® available). Direct Acting type.

 
Eaton Vickers®
DG4V4-01 solenoid-operated

NFPA Size D05 High Pressure solenoid-operated hydraulic control valves
DG4V4-01 10- Series • High Pressure
Flows to 30 GPM
Features: High pressure & flow capability. Plug-in solenoid coils for ease of servicing. Spool cushioning passage equalizes hydraulic force on ends of spool and cushions spool shift. Wet Armature design for quieter operation and long life with no dynamic seal leakage. Molded coil is impervious to moisture & dirt. Buna-N seals standard (Viton® available). Direct Acting type.

 
Eaton Vickers®
DG4S4-01 solenoid-operated

NFPA Size D05 Soft Shift solenoid-operated hydraulic control valves
DG4S4-01 60 Series • Soft Shift
Flows to 20 GPM
Features: Low cost alternative to proportional valves. Conventional direct-acting solenoid design with controlled solenoid shift speed. Wet Armature design for quieter operation and long life with no dynamic seal leakage. Molded coil is impervious to moisture & dirt. Viton® seals standard.

 
Eaton Vickers®
DG4S4-01 solenoid-operated
(Old Air Gap Design)

NFPA Size D05 Air Gap solenoid-operated hydraulic control valves
DG4S4-01 50 Series (Air-Gap) • Older Design
Features: Older style Direct Acting Air Gap Solenoids. (Used as a replacement part for older equipment. New applications should use the Wet Armature 60 Series). Viton® seals standard.

 
Eaton Vickers® DG5S-8 solenoid-operated

NFPA Size D08 solenoid-operated hydraulic control valves
DG5S-8 Series • Flows to 45 GPM
Features: Two-stage directional valve with integrally mounted pilot valve. Available with a wide variety of spool and spring arrangements, electrical options, stroke and pilot choke adjustments, integral check valves and port orifices. Solid cast iron body and core passages for maximum strength and minimal pressure drop. High-force solenoids and centering springs assure consistent shifting.

 
Eaton Vickers® DG5V-8 solenoid-operated

NFPA Size D08 High Pressure solenoid-operated hydraulic control valves
DG5V-8 Series • Flows to 185 GPM
Features: Two-stage directional valve with integrally mounted pilot valve. Available with a wide variety of spool and spring arrangements, electrical options, stroke and pilot choke adjustments, integral check valves and port orifices. Solid cast iron body and core passages for maximum strength and minimal pressure drop. High-force solenoids and centering springs assure consistent shifting.

 
Eaton Vickers® DG5V-10 solenoid-operated

NFPA Size D10 High Pressure solenoid-operated hydraulic control valves
DG5V-10 Series • Flows to 290 GPM
Features: This control valve package offers a wide variety of spool and spring arrangements, pilot choke adjustments, integral check valves, pilot valve choices and port orifices. High force solenoids and centering springs assure consistent shifting through a wide range of pressure and silting extremes.


Hydraulic Supply Co. is located in Florida and Georgia, and is an Eaton Premier Select distributor.
See our Company Overview to find out more about us.

Our on-line Stock Products Catalog includes solenoid operated hydraulic control valves and has over 1400 pages of hydraulic, pneumatic and fluid conveying products to choose from - and every one of them is in stock and available for immediate delivery.

Click on Order On-line for browsing product categories, checking price and quantity on hand, order entry and much more.

See our Contact Us page to get in touch and get the help you need with your solenoid operated hydraulic control valves requirement.
 

Links to other control valves pages
control valves  control valve  proportional hydraulic control valves  pilot operated hydraulic control valves  sectional hydraulic control valves  manually operated hydraulic control valves  flow control valves