variable area flow meters - Hydraulic Supply Co.

VARIABLE AREA FLOW METERS

variable area flow meters
Hedland has been a manufacturer of quality flow measurement solutions for over 30 years. Since the introduction of the Hedland Variable Area Flow Meters for hydraulic oil, their product line has grown to over 10,000 flow meter models including turbine flow meters, positive displacement flow meters, transit time ultrasonic flow meters, switches and transmitters. These products provide cost effective flow measurement in the following applications: oil, phosphate esters, water, water-based fluids, air, and other compressed gases. Hydraulic Supply Co. is located in Florida and Georgia, and is a distributor for Hedland® variable area flow meters See our Company Overview to find out more about us. Our on-line Stock Products Catalog includes variable area Hedland flow meters and has over 1400 pages of hydraulic, pneumatic and fluid conveying products to choose from - and every one of them is in stock and available for immediate delivery. Click on “Order On-line” for browsing product categories, checking price and quantity on hand, order entry and much more. See our Contact Us page to get in touch and get the help you need with your variable area flow meters requirement.
Variable Area High Pressure flow meters For Petroleum Fluids
Hedland® Variable Area High Pressure	Basic Flow Meter Direct reading Install in any position 360° rotating guard/scale Easier to read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability (40 to 500 SUS) Temperature up to 240 °F Pressure up to 6,000 psi maximum Accuracy ±2% full scale Repeatability ±1% Standard calibration: .876 specific gravity, 140 SUS hydraulic oil Construction: Aluminum, brass and T303 stainless steel Flow range: 0.02 to 300 GPM Sizes: 1/4 to 3 inch ports Ports: SAE, NPTF, BSPP, Code 61 and Code 62, 4-bolt flanged Optional: - Special scales available - Reverse flow by-pass

Variable Area High Pressure flow meters For Phosphate Ester Fluids
Hedland® Variable Area High Pressure	Basic Flow Meters Direct reading Install in any position 360° rotatable guard/scale Easier to read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability (40 to 500 SUS) Consult factory for other viscosities Temperature up to 240 °F Pressure up to 6,000 psi maximum Accuracy ±2% full scale Repeatability ±1% Standard calibration: 1.18 specific gravity, 140 SUS hydraulic oil Construction: Aluminum, brass and T303 stainless steel Flow range: 0.02 to 150 GPM Sizes: 1/4 to 1-1/2 inch ports Ports: SAE, NPTF, BSPP, Code 62, 4-bolt flanged Optional: - Special scales available - Reverse flow by-pass CAUTION: Skydrol & fryquel oil may require a pyrex guard

Variable Area High Pressure flow meters For Water Based Fluids
Hedland® Variable Area High Pressure	Basic Flow Meters Direct reading Install in any position 360° rotatable guard/scale Easier to read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability (40 to 500 SUS) Consult factory for other viscosities Temperature up to 240 °F Pressure up to 6,000 psi maximum Accuracy ±2% full scale Repeatability ±1% Standard calibration: 1.0 specific gravity for water-based emulsions Construction: Aluminum, brass and T303 stainless steel Flow range: 0.02 to 275 GPM Sizes: 1/4 to 3 inch ports Ports: SAE, NPTF, BSPP, Code 61 and Code 62, 4-bolt flanged Optional: - Special scales available - Reverse flow by-pass CAUTION: Not recommended for water only applications

Variable Area High Pressure flow meters For Water & Other Fluids
Hedland® Variable Area High Pressure flow meters	Basic Flow Meters Direct reading Install in any position 360° rotatable guard/scale Easier to read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 240 °F Pressure up to 6,000 psi maximum Accuracy ±2% full scale Repeatability ±1% Standard calibration: 1.0 specific gravity Construction: Brass and T303 stainless steel Flow range: 0.02 to 150 GPM Sizes: 1/4 to 3 inch ports Ports: SAE, NPTF and BSPP Optional: Special scales available

Variable Area High Pressure flow meters For API Oil / Caustic & Corrosive Liquids
Hedland® Variable Area High Pressure	Basic Flow Meters Direct reading Install in any position 360° rotatable guard/scale Easier to read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Good viscosity stability Temperature up to 240 °F Pressure up to 6,000 psi maximum Accuracy ±2% full scale Repeatability ± 1% Standard calibration: 0.876 specific gravity for oil 1.0 specific gravity for water Construction: T316 stainless steel Flow range: 0.1 to 100 GPM Sizes: 1/4 to 1-1/2 inch ports Ports: NPTF and BSPP Optional: - Special scales available - Hostile environment kit for corrosive vapors and high temp

Variable Area High Pressure flow meters For Air / Caustic & Corrosive Gasses
Hedland® Variable Area High Pressure	Basic Flow Meters Direct reading Install in any position 360° rotatable guard/scale Easier to read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Temperature up to 240 °F Pressure up to 1,500 psi maximum Accuracy ±2% full scale Repeatability ±1% Standard calibration: 1.0 specific gravity Construction: T316 stainless steel Flow range: 2 to 800 SCFM Sizes: 1/4 to 1/12 inch ports Ports: NPTF and BSPP Optional: - Special scales available - Hostile environment kit for corrosive vapors and high temp

Variable Area High Pressure flow meters For Air & Compressed Gasses
Hedland® Variable Area High Pressure	Basic Flow Meters Direct reading Install in any position 360° rotatable guard/scale Easier to read linear scale No flow straighteners or special piping required Relatively insensitive to shock and vibration Temperature up to 240 °F Pressure up to 1,000 psi maximum Accuracy ±2% full scale Repeatability ±1% Standard calibration: 1.0 specific gravity Construction: Aluminum, brass and T303 stainless steel Flow range: 0.5 to 2200 SCFM Sizes: 1/4 to 3 inch ports Ports: SAE, NPTF and BSPP Optional: - Special scales available - EP option for extended inlet cap with plugged pressure gauge port - EG option for extended inlet cap with pressure gauge installed

Variable Area EZ-View® flow meters For oil, water, air and compressed gases
Hedland® Variable Area EZ-View®	Basic Flow Meters Available in 1/2 to 2 inch ports Offered in a wide variety of fitting styles EZ to install in any position No special piping or flow straighteners needed No electrical connections Direct reading indication Accuracy within ±5% Relatively insensitive to shock and vibration Rugged polysulfone construction Pressure up to - 325 psi maximum for oil & water - 125 psi maximum for air & gases Temperature up to 250 °F maximum Flow range: 0.5 to 28 GPM Standard calibration: - .876 specific gravity for oil - 1.0 specific gravity for water & air Optional: Special scales available


Related flow meter pages flow meter air flow meter water flow meter oil flow meter inline flow meters
Links to main site [ News \| [Company Overview \| Corporate Headquarters \| Retail and Repair Locations ] [ Aircraft Division \| IGS Division \| Core Purpose/Values/Goals \| Contact Us \| Site Map ] [ Browse / Request Catalog \| Products List \| Support & Services \| Affiliate Locations ] [ Human Resources \| Positions Available \| How to Apply for a Position \| Team Member Benefits ] [ Why Join the HSC Family? \| Credit Application \| Order Online \| Join ]