water flow meter from Hedland®
|
|
Hedland has been a manufacturer of quality
flow measurement solutions for over 30 years. Since the introduction
of the Hedland Variable Area Flow Meter for hydraulic oil, their
product line has grown to over 10,000 flow meter models including
turbine flow meters, positive displacement flow meters, transit time
ultrasonic flow meters, switches and transmitters. These products
provide cost effective flow measurement in the following
applications: oil, phosphate esters, water, water-based fluids, air,
and other compressed gases. |
|
Variable Area EZ-View® water flow meter
For oil, water, air and compressed gases |
|
Hedland® Variable Area EZ-View® |
Basic water flow meter
Available in 1/2 to 2 inch ports
Offered in a wide variety of fitting styles
EZ to install in any position
No special piping or flow straighteners needed
No electrical connections
Direct reading indication
Accuracy within ±5%
Relatively insensitive to shock and vibration
Rugged polysulfone construction
Pressure up to
- 325 psi maximum for oil & water
- 125 psi maximum for air & gases
Temperature up to 250 °F maximum
Flow range: 0.5 to 28 GPM
Standard calibration:
- .876 specific gravity for oil
- 1.0 specific gravity for water & air
Optional: Special scales available |
|
|
|
Variable Area High Pressure water flow meter
For Water & Other Fluids |
|
Hedland® Variable Area High Pressure |
Basic water flow meter
Direct reading
Install in any position
360° rotatable guard/scale
Easier to read linear scale
No flow straighteners or special piping required
Relatively insensitive to shock and vibration
Good viscosity stability
Temperature up to 240 °F
Pressure up to 6,000 psi maximum
Accuracy ±2% full scale
Repeatability ±1%
Standard calibration: 1.0 specific gravity
Construction: Brass and T303 stainless steel
Flow range: 0.02 to 150 GPM
Sizes: 1/4 to 3 inch ports
Ports: SAE, NPTF and BSPP
Optional: Special scales available |
|
Hedland® Variable Area High Pressure & High Temperature |
High Temperature water
flow meter
Good viscosity stability (40 to 500 SUS)
Consult factory for other viscosities
Temperature up to 500 °F
Pressure up to 6,000 psi maximum
Accuracy ±2% full scale
Repeatability ± 1%
Standard calibration: 1.0 specific gravity
Construction: Brass and T303 stainless steel
Flow range: 0.1 to 150 GPM
Sizes: 1/4 to 1-1/2 inch ports
Ports: SAE, NPTF and BSPP
Optional: Special scales available |
|
|
|
Turbine water flow meter
For water & water-base fluids |
|
Hedland® Turbine water flow meters |
Meter bore sizes from 3/8
to 10 inch
Ports:
- 1/2 to 2 inch NPT
- 3 to 10 inch Victaulic grooved ends
Accuracy within ±1% of reading
Pressure: 5,000 psi maximum
Temperature:
- Standard: 330 °F maximum
- High Temp: 450 °F maximum
Flow range: 0.6 to 5,000 GPM
Rugged contruction
- Body: T316 Stainless steel
- Rotor: T416 Stainless steel
- Internal supports: Tungsten carbide
- Bearings: Tungsten carbide journals
- Retaining rings: T303 Stainless steel
- Pick-up: Magnetic, Standard
Standard calibration: 1.0 specific gravity for water and water-based
liquids
Magnetic pick-up output: 30 millivolts to 3 volts – peak-to-peak |
|
|
|
Hydraulic Supply Co. is located in Florida
and Georgia, and is a distributor for Hedland® water flow meter
See our Company
Overview to find out more about us.
Our on-line Stock
Products Catalog includes Hedland flow meter (for oil) and has over 1400 pages of hydraulic, pneumatic and
fluid conveying products to choose from - and every one of them is in
stock and available for immediate delivery.
Click on “Order On-line” for browsing product categories, checking price and quantity on hand, order entry and much more.
See our Contact
Us page to get in touch and get the help you need with your water flow
meter
requirement.
|
|
 |
|
Related flow meter pages
flow meter
air flow meter
oil flow meter
inline flow meters
variable area flow meters
|
|
|
