Ingersoll-Rand Aro Pumps
In-Stock IR Aro diaphragm pumps
Special Order IR Aro piston pumps
|
|
IR Aro® pumps - diaphragm type |
|
See our on-line Stock
Products Catalog for detailed product information on these Aro
pumps (diaphragm type) we
keep in stock. |
|
IR
Aro® pumps
1/4 Inch non-metallic diaphragm pumps |
1/4 Inch Ports
IR Aro diaphragm pumps
Maximum Flow Rate: 4.6 GPM.
Displacement: 0.014 Gallons per Cycle.
Maximum Operating Pressure: 100 PSI.
Suspended Solids Capability: Clean fluids only.
Maximum Dry Suction Lift: 20 ft.
Fluid Ports: 3/8 NPT Inlet. 1/4 NPT Outlet.
Air Inlet: 1/4 NPT. |
|
IR
Aro® pumps
1/2 Inch non-metallic diaphragm pumps |
1/2 Inch Ports
IR Aro diaphragm pumps
Maximum Flow Rate: 13 GPM.
Displacement: 0.04 Gallons per Cycle.
Maximum Operating Pressure: 100 PSI.
Suspended Solids Capability: 3/32 inch diameter.
Maximum Dry Suction Lift: 10 ft. (Teflon® fitted).
Fluid Ports: 1/2 NPT Inlet. 1/2 NPT Outlet.
Air Inlet: 1/4 NPT. |
|
IR
Aro® pumps
1 Inch metallic diaphragm pumps |
1 Inch Ports IR Aro diaphragm
pumps
Maximum Flow Rate: 35 GPM.
Displacement: 0.16 Gallons per Cycle.
Maximum Operating Pressure: 120 PSI.
Suspended Solids Capability: 1/8 inch diameter.
Maximum Dry Suction Lift: 20 ft. (Rubber fitted).
Fluid Ports: 1 inch NPT Inlet. 1 inch NPT Outlet.
Air Inlet: 1/4 NPT. |
|
IR
Aro® pumps
1-1/2 Inch metallic diaphragm pumps |
1-1/2 Inch Ports
IR Aro diaphragm pumps
Maximum Flow Rate: 100 GPM.
Displacement: 0.73 Gallons per Cycle.
Maximum Operating Pressure: 120 PSI.
Suspended Solids Capability: 1/4 inch diameter.
Maximum Dry Suction Lift: 19 ft. (Rubber fitted).
Fluid Ports: 1-1/2 NPT Inlet. 1-1/2 NPT Outlet.
Air Inlet: 1/2 NPT. |
|
IR
Aro® pumps
2 Inch metallic diaphragm pumps |
2 Inch Ports IR Aro diaphragm
pumps
Maximum Flow Rate: 170 GPM.
Displacement: 1.4 Gallons per Cycle.
Maximum Operating Pressure: 120 PSI.
Suspended Solids Capability: 1/4 inch diameter.
Maximum Dry Suction Lift: 19 ft. (Rubber fitted).
Fluid Ports: 2 inch NPT Inlet. 2 inch NPT Outlet.
Air Inlet & Outlet: 3/4 NPT Inlet. 1-1/2 NPT Exhaust. |
|
|
|
IR Aro® pumps - piston type |
|
Please Contact
Us to get detailed product information on these Aro pumps (piston
type). |
|
IR Aro® piston pumps |
IR Aro piston pumps are
used in some of the toughest applications throughout industry. This
broad range of pumps are used with low-to-high viscosity fluids for
general transfer, fluid recirculation and extrusion.
Lower ends are constructed of carbon or stainless steel, providing
optimum fluid compatibility.
Chrome-plating and their exclusive ultra-coating combat the wear
associated with moving abrasive fluids.
The six-inch stroke air motors allow operators to slow pump cycling,
further extending service life.
IR Aro piston pumps are available in ratios from 1:1-to-65:1 Models
include two-ball, four-ball and chop-check (extrusion) lower ends. |
|
|
|
Hydraulic Supply Co. is located in Florida
and Georgia, and is a distributor for Ingersoll-Rand Aro®, a leading manufacturer of
air-operated diaphragm and piston pumps.
See our Company
Overview to find out more about us.
Our on-line Stock
Products Catalog includes IR Aro pumps and has over 1400 pages of hydraulic, pneumatic and
fluid conveying products to choose from - and every one of them is in
stock and available for immediate delivery.
Click on “Order On-line” for browsing product categories, checking price and quantity on hand, order entry and much more.
See our Contact
Us page to get in touch and get the help you need with your
IR Aro pumps
requirement.
|
