A hydraulic remote control puts the valve's lever in the operator's hand without putting the valve in the operator's lap. On a dump truck, a loader, a snowplow, or a work body, the valve belongs near the pump and the cylinders, and the operator belongs in the cab. A cable remote control bridges that gap mechanically. A lever station in the cab shifts the valve spool through a push-pull cable, so the valve can live wherever the plumbing works best. Hydraulic Supply Company stocks cable remote control kits, replacement control cables, and the hardware that finishes the operator station. We also build custom cable assemblies when catalog lengths don't fit the machine.
How Cable Remote Controls Work
A cable remote control has three parts: the lever station, the cable, and the connection at the valve. Moving the lever pushes or pulls a solid inner core that slides inside a protective outer conduit. At the far end, that motion shifts the valve spool exactly as the valve's own handle would. Because the linkage is purely mechanical, the operator keeps the direct feel of a manual valve and the system needs no wiring, switches, or electrical power at all.
Lever stations come in single and stackable configurations. A single lever runs one valve section. Stackable kits combine multiple levers side by side, so one operator station can run every section of a multi-spool valve. Our kits are available in 1 to 6 lever configurations to match the number of functions on the machine.
Matching a Remote Kit to Your Valve
A cable remote control is only as good as its connection to the spool, and that connection is specific to the valve. Remote kits include the adapter that replaces or attaches to the valve's handle mechanism, and that adapter has to match the valve's spool end, mounting pattern, and spool travel. Our kits include options designed for Salami directional control valves, along with fixing kits for building stackable lever stations.
Before ordering, confirm three things about the valve: the manufacturer and series, the number of sections, and whether it is a manually operated directional control valve designed to accept a remote kit. If the valve is unmarked or the original documentation is long gone, our branch teams can help identify it from photos or the part itself.
Control Cables: Length, Routing, and Replacement
The cable is the part of the system that wears. Conduits crack, cores corrode, and a cable that was routed carelessly on installation day gets stiffer every season. Replacement control cables restore smooth shifting without replacing the lever station or the valve.
Three factors decide whether a cable run works well:
-
Length: match the replacement to the original using the same measurement convention the cable was specified with, and match the end fittings at both ends.
-
Stroke: the cable's travel has to cover the spool's full shift in both directions, or the valve never fully opens.
-
Routing: every bend adds friction and lost motion. Route with the gentlest curves the machine allows, and clamp the conduit securely at both ends so it cannot move under load.
When a standard length won't fit the machine, our control cable assemblies service builds custom-length cables with the correct end fittings for your application. Truck applications that shift a power take-off by cable can find dedicated PTO cables in our catalog.
Cable Hardware and Knobs
The operator station is where the operator actually meets the machine, so it pays to finish it properly. Cable hardware and knobs cover the mounting brackets, clamps, end fittings, and handles that complete an installation or bring a worn station back into service.
Cable or Electric? Choosing the Right Remote Control
Cable remote controls are the simplest way to run a valve from a distance, but they are not the only way. A solenoid operated directional control valve shifts its spool electrically, replacing the cable with wiring and the lever with a switch.
Choose a cable remote when:
-
The run from cab to valve is reasonably short and direct.
-
The machine has no reliable electrical supply at the valve.
-
The operator values the direct mechanical feel of the spool.
Choose solenoid operation when:
-
The cable run would be long or heavily bent.
-
The valve needs to integrate with interlocks, sensors, or other electrical controls.
-
Automation is on the roadmap.
When the application needs variable speed rather than on-off shifting, a proportional valve paired with electronic control components adds commanded speed and smooth, feathered motion.
Converting a Manual Valve to Remote Operation
If the valve on your machine already works, you may not need a new one to control it from the cab. Many manually operated valves can accept a cable remote kit, which attaches to the spool in place of the existing handle linkage, so the valve stays in place and only the control method changes. Some valves can also be converted to solenoid operation.
Whether a conversion works depends on the specific valve, and that is the question to answer before buying parts. Our Engineering Center reviews the valve, the machine, and the operator's needs, then recommends the conversion kit, cable routing, or replacement valve that fits. That way the retrofit works on the first install.
Troubleshooting Cable Remote Controls
Most cable remote problems trace back to the cable, not the valve:
-
The lever is stiff or hard to move. The cable is usually binding. Look for kinks, crushed conduit, or corrosion where water has entered the jacket, and check whether the run has too many tight bends. If the lever is still stiff with the cable disconnected at the valve, the cable or lever station is binding. If it moves freely, inspect the valve spool.
-
The valve doesn't fully shift. The cable is losing travel before it reaches the spool. Check that the conduit is clamped firmly at both ends, since a conduit that shifts under load absorbs stroke. Also check the end fittings for wear or loose adjustment.
-
The valve won't return to neutral. Binding in the cable can hold the spool off center. Disconnect the cable at the valve. If the spool centers on its own, the cable or its routing needs attention. If it doesn't, the valve's centering mechanism needs service, which our hydraulic repair and service team can handle.