SAME DAY SHIPPING
— Order by 2pm EST.
Toggle Nav
Cart
Search
main product photo

1.5PE Series Aluminium Gear Pump, 0.09 cu in/rev, 2-Bolt SAE AA Mounting Flange, 1/2 St. Keyed x 1.06 long, SAE AA Shaft, SAE -8 Side Inlet, SAE -6 Side Outlet, CW Rotation

Ask A Question

Description & Features

This 1.5PE Series Aluminium Gear Pump is designed for durability and efficiency in demanding hydraulic environments. Its advanced bushing and seal configuration ensures optimal performance, even under high temperature and low viscosity conditions.

The SALAMI HYDRAULICS NA INC gear pump features a 2-Bolt SAE AA mounting flange, a 1/2 St. Keyed x 1.06 long SAE AA shaft, an SAE -8 side inlet, and an SAE -6 side outlet. It has a displacement of 0.09 cu in/rev, a rated flow of 0.6 GPM, and a pressure rating of 3625 PSI. This single hydraulic gear pump is configured for CW rotation, which can be reversed by reconfiguring the drive shaft, driven shaft and front flange.

This gear pump is suitable for continuous speeds up to 4250 RPM, with intermittent speeds up to 5000 RPM. Proper filtration is essential: use ISO 4406 20/19/16 for pressure below 2900 PSI, and ISO 4406 19/18/15 for pressure above 2900 PSI. The recommended temperature range is 5°F to 185°F with Buna-N seals, or -4°F to 230°F with FPM (Viton) seals.

SKU: 610910302

Supplier Part Number (MPN): 610910302

Alternate Part Numbers: 1.5PE1.4D-R80S0, 1.5PE1.4D-R80S0 PUMP, C1MQ96

Specifications

Brand
Salami
Dimensions
4.32 in L x 2.76 in W x 3.25 in H
Grp Pressure Limit
Inlet Pressure - 7.38 inHg to 21.7 psi, Pump Outlet - Continuous Working Pressure Varies with Displacement, Peak Pressure Pressures up to 4205 psi
grp Recommended Filtration
< 2900 psi - 20/19/16 um, > 2900 psi - 19/18/15 um
grp Recommended Fluids
Minimum Operating Fluid Viscosity - 66 SSU (with 80% Reduction of Working Pressure and at Minimum Speed) to 3635 SSU (Maximum Starting Viscosity), Normal Operating Range - 85 SSU to 297 SSU
Housing Material
Aluminum
Inlet Type
SAE Threaded
Mount
2-Bolt SAE AA
Mounting Type
Flange
Outlet Type
SAE Threaded
Rotation
Clockwise
Seal Material
Nitrile
Series
1.5PE Series
Shaft
1/2 in Straight Keyed x 1.06 in Long SAE AA

Product Questions & Answers (2)

Sign In Hover me Please sign in to submit a question
Question by: Peggy D on Sep 4, 2025, 9:45 PM
Hey, will this gear pump bolt right up to a standard SAE AA mount? Just wanna make sure before I order.
Answer by: Customer Support on Sep 6, 2025, 6:07 AM
Yes, this 1.5PE series gear pump uses a 2-Bolt SAE AA mounting flange.
Question by: Jean T on Aug 2, 2025, 1:45 PM
pump runs clockwise right? wanting to make sure before i go swappin anything out on my skid unit
Answer by: Customer Support on Aug 4, 2025, 7:49 AM
Clockwise rotation is the standard configuration on this pump. Worth knowing though, rotation can be changed by swapping the drive shaft and driven shaft positions and rotating the front flange, so it's not a permanent limitation if your setup calls for something different down the road.

Tell us what you need and we'll get back to you.

Fields marked * are required.