SAME DAY SHIPPING
— Order by 2pm EST.
Toggle Nav
Cart
Search
main product photo

1.5PE Series Aluminium Gear Pump, 0.46 cu in/rev, 2-Bolt SAE AA Mounting Flange, 9T 20/40 DP Spline, SAE AA Shaft, SAE -10 Side Inlet, SAE -8 Side Outlet, CW Rotation

Ask A Question

Description & Features

This Salami 1.5PE Series Aluminium Gear Pump features a 0.46 cu in/rev displacement and is designed for high efficiency and extended life in demanding operating environments. It incorporates an advanced bushing and seal configuration that optimizes performance, even under high temperature and low viscosity conditions.

This gear pump has a 2-Bolt SAE AA mounting flange, a 9T 20/40 DP Spline SAE AA shaft, a SAE -10 side inlet, and a SAE -8 side outlet. It is configured for clockwise rotation, but rotation can be reversed by repositioning the drive and driven shafts and rotating the front flange. The pump has a continuous working pressure that varies with displacement, with peak pressures up to 4205 PSI.

SKU: 610910472

Supplier Part Number (MPN): 610910472

Alternate Part Numbers: 1.5PE7.6D-R51S0, C1MV55

Specifications

Brand
Salami
Dimensions
5.01 in L x 2.76 in W x 3.25 in H
Grp Pressure Limit
Inlet Pressure - 7.38 inHg to 21.7 psi, Pump Outlet - Continuous Working Pressure Varies with Displacement, Peak Pressure Pressures up to 4205 psi
grp Recommended Filtration
< 2900 psi - 20/19/16 um, > 2900 psi - 19/18/15 um
grp Recommended Fluids
Minimum Operating Fluid Viscosity - 66 SSU (with 80% Reduction of Working Pressure and at Minimum Speed) to 3635 SSU (Maximum Starting Viscosity), Normal Operating Range - 85 SSU to 297 SSU
Housing Material
Aluminum
Inlet Type
SAE Threaded
Mount
2-Bolt SAE AA
Mounting Type
Flange
Outlet Type
SAE Threaded
Rotation
Clockwise
Seal Material
Nitrile
Series
1.5PE Series
Shaft
9 Tooth 20/40 DP Splined, SAE AA

Product Questions & Answers (2)

Sign In Hover me Please sign in to submit a question
Question by: Harold C on Mar 4, 2026, 3:09 PM
Will this pump work with Viton seals if I need it to handle higher temperatures?
Answer by: Customer Support on Mar 5, 2026, 3:27 PM
With FPM (Viton) seals, this pump can handle temperatures from -4°F to 230°F. Standard Buna-N seals are rated for 5°F to 185°F.
Question by: Wade C on Jun 22, 2025, 9:17 PM
clockwise rotation only, or can this pump be flipped to run counterclockwise if needed?
Answer by: Customer Support on Jun 24, 2025, 2:07 PM
Rotation on this pump can be changed by reversing the positions of the drive shaft and driven shaft and rotating the front flange. It ships standard with clockwise rotation, but the configuration is not locked in permanently. Worth noting before you swap anything around though, the inlet and outlet ports are side-mounted, SAE -10 on the inlet and SAE -8 on the outlet, so plan your hydraulic connections accordingly once you decide on rotation direction.

Tell us what you need and we'll get back to you.

Fields marked * are required.