SPX NEEDLE VALVE

Description & Features

Designed for use with single- or double-acting cylinders, this needle valve from Spx High Force Hydraulics allows precise adjustment of operating pressures at values below the pump's relief valve setting. The flow range spans from 17 cubic inches per minute up to 6 GPM, supporting a wide range of hydraulic circuit configurations.

The SPX Needle Valve maintains a given pressure setting within 3% accuracy across repeated cycles, with an adjustable range of 300 to 10,000 PSI. It also provides economical circuit protection against over-pressurization, with a factory pre-set relief valve function, a maximum flow rate of 5 GPM, and a 1/8 NPTF male inlet connection.

SKU: 9575

Supplier Part Number (MPN): 9575

Alternate Part Numbers: C1JN15

Specifications

Brand
SPX-FLOW
Actuator Type
Handwheel
Configuration
In-Line
Connection Type
MNPTF
Grp Application
Single- or double-acting cylinders. Permits adjusting operating pressures at various values below relief valve setting of pump. Operation: Regulator valve is easily adjusted to maintain pressures between 300 and 10,000 psi. Maintains a given pressure sett
grp RV21278 Relief Valves
Application: Provide An Economical Means of Protecting A Hydraulic Circuit Against Over Pressurization, Factory Pre-set, Maximum Flow Rate of 5 gpm, 1/8 NPTF Male inlet
Number of Handles
1
Number of Ports/Ways
2

Similar Products

Model Number Connection Type Pressure Rating Actuator Type Price Action
SPX Power Team LOAD LOWERing Valve

9596 10000 PSI In-Line Valve

NPTF

Lever

Relief Valve. Pre-set at 1,500 to 1,700 psi. Non-adjustable. 1/8

RV21278-15 10000 PSI In-Line Valve

FNPT

Relief Valve. Pre-set at 2,300 to 2,700 psi. Non-adjustable. 1/8

RV21278-25 10000 PSI In-Line Valve

FNPT

Product Questions & Answers (1)

Question by: Wayne E on Oct 20, 2025, 7:28 AM
trying to dial back pressure on my cylinder setup, will this valve let me set it under the pump relief and keep it there?
Answer by: Customer Support on Oct 22, 2025, 6:09 AM
For dialing in cylinder pressure below your pump relief setting, the regulator adjustment on this SPX needle valve is made to hold between 300 and 10,000 psi, and it stays within about 3% of the set pressure over repeated cycles.

Tell us what you need and we'll get back to you.

Fields marked * are required.