Skip to the beginning of the images gallery

10000 Series Geroler Motor, 57.40 cu in/rev, 4 Bolt SAE C Mounting Flange, 2-1/4 in. Straight Keyed Shaft, 1-5/16-12 St.Thd. O-Ring Ports,

Description & Features

The 10000 Series Geroler Motor features a displacement of 57.40 cu in/rev designed for industrial applications metal forming port equipment and saw mills. Known for its efficiency this motor operates with the lowest pressure drop in the industry optimizing energy usage.

Equipped with a 4 Bolt SAE C mounting flange this motor includes a 2-1/4 in. straight keyed shaft and 1-5/16-12 St.Thd. O-Ring Ports. The motor's robust design supports a torque rating of 2700 Newton metres.

Fluid viscosity should range from 100-200 SUS with a minimum of 70 SUS at operating temperature. Maximum case pressure is rated at 300 PSI.

Maximum operating temperature is set at 180F with recommended filtration per ISO Cleanliness Code level 18/13. Premium quality anti-wear type hydraulic fluids are recommended for optimal performance.

To extend motor life a break-in period of approximately one hour at 30% of rated pressure is advised.

MPN: 119-1031-003

Supplier Part Number: 119-1031-003

Specifications

Brand Danfoss	Bearing Type Tapered Roller	Check Valve Function Without Check Valve Function	Design Code 3	Dimensions 17.74 in L x 5.91 in W x 5.79 in H	Drain Port Dimension 9/16-18 UNF-2B SAE O-ring	Frame Size 940	Housing Material Iron	Mounting Type 4-Bolt Square Flanged	Orbital Gearwheel Set Standard	Orbital Gearwheel Set Type Geroler	Painted Without Painted	Port Location Side, Staggered	Port Type UN-2B, SAE O-ring	Seal Material NBR	Segment Code A	Series 10000 Series	Shaft Type Straight Keyed	Valve Type Disc

Similar Products

Model Number	Port Type	Shaft Type	Shaft Size	Dimensions	Segment Code
119-1043 10000 Series Geroler Motor	UNC-2B, Code 61 Split Flange	Straight Keyed		17.74 in L x 5.91 in W x 5.79 in H	A
119-1029 10000 Series Geroler Motor	UN-2B, SAE O-ring	Straight Keyed		17.74 in L x 5.91 in W x 5.79 in H	A
119-1028 10000 Series Geroler Motor	UN-2B, SAE O-ring	Straight Keyed		17.74 in L x 5.91 in W x 5.79 in H	A
119-1030 10000 Series Geroler Motor	UN-2B, SAE O-ring	Straight Keyed		17.74 in L x 5.91 in W x 5.79 in H	A
119-1042 10000 Series Geroler Motor	UNC-2B, Code 61 Split Flange	Straight Keyed		17.74 in L x 5.91 in W x 5.79 in H	B
119-1032	UN-2B, SAE O-ring	Splined	2-1/8 in Dia	17.74 in L x 5.91 in W x 5.79 in H	B
119-1033	UN-2B, SAE O-ring	Splined	2-1/8 in Dia	17.74 in L x 5.91 in W x 5.79 in H	A
119-1034	UN-2B, SAE O-ring	Splined	2-1/8 in Dia	17.74 in L x 5.91 in W x 5.79 in H	A
119-1035	UN-2B, SAE O-ring	Splined	2-1/8 in Dia	17.74 in L x 5.91 in W x 5.79 in H	A
119-1036	UN-2B, SAE O-ring	Tapered Square Keyed		17.24 in L x 5.91 in W x 5.79 in H
119-1037	UN-2B, SAE O-ring	Tapered Square Keyed		17.74 in L x 5.91 in W x 5.79 in H	B
119-1038	UN-2B, SAE O-ring	Tapered Square Keyed		17.74 in L x 5.91 in W x 5.79 in H	B
119-1039	UN-2B, SAE O-ring	Tapered Square Keyed		18.46 in L x 5.91 in W x 5.79 in H	B
119-1040	UNC-2B, Split Flange	Straight Keyed		17.24 in L x 5.91 in W x 5.79 in H	A
119-1041	UNC-2B, Split Flange	Straight Keyed		17.74 in L x 5.91 in W x 5.79 in H	B

Product Questions & Answers (2)

Question by: Phil E on May 31, 2025, 2:15 PM

What kind of machines would you typically see this motor used on?

Answer by: Customer Support on Jun 2, 2025, 6:39 AM

It's often found in industrial settings, especially on metal forming equipment, port machinery, and even sawmills.

Question by: Terry K on Apr 30, 2025, 8:07 PM

what kind of hydraulic fluid does this motor call for, and is there a viscosity range i need to stay inside of?

Answer by: Customer Support on May 2, 2025, 6:36 AM

Premium anti-wear hydraulic fluid is what you want running through it. Viscosity should stay between 100 and 200 SUS under normal operating conditions, and you never want to drop below 70 SUS at operating temperature. Push it thinner than that and you're going to accelerate wear in a hurry.

10000 Series Geroler Motor, 57.40 cu in/rev, 4 Bolt SAE C Mounting Flange, 2-1/4 in. Straight Keyed Shaft, 1-5/16-12 St.Thd. O-Ring Ports,

Description & Features

Specifications

Related Documents

Similar Products

Product Questions & Answers (2)