Skip to the beginning of the images gallery

1CE30 Series Counterbalance Cartridge Valves, Up To 5000 PSI & 8 GPM

Description & Features

Application	To control moving loads and prevent load runaway, giving load holding and hose failure safety. See Introduction to Counterbalance (Overcenter) Valves at the beginning of this section.
Features	The 1CE30 is a 3 port, externally piloted, screw-in cartridge-type counterbalance (overcenter) valve. Requires a machined A6610 cavity or housing for installation.
Housing	Cavity A6610 valve housings (single, dual)
Installation	33 ft-lbs torque cartridge into cavity. Unrestricted mounting position.
Pilot Ratios	2.5:1 - Best suited for extremely unstable applications such as long booms or flexible frameworks. 5:1 - (standard) Best suited for applications where load varies and machine structure can induce instability. 10:1 - Best suited for applications where the load remains relatively constant.
Recommended Filtration	ISO level 18/13 or better.
Specifications	8 gpm rated flow. 4000 psi max load induced pressure, 5000 psi max relief pressure. CAUTION: Pressures over 3000 psi require a steel housing. -22° to +194°F operating temperature range. 5 drops per minute max internal leakage. Based on oil temperature of 104°F and 150 SSU.

Products

Model Number	Part Number	Pilot Ratio	Adjustment Style	Pressure Range (psi)	Pressure Setting	Housing	Seal Material
1CE30F35S5 1CE30 Series Cartridge Valve	406AA00005A	5:1	Screw with Locknut	1740-5075	3045	None	Nitrile
1CE30F35S2 1CE30 Series Cartridge Valve	406AA00004A	2.5:1	Screw with Locknut	1740-5075	3045	None	Nitrile
1CE30F35S10 1CE30 Series Cartridge Valve	406AA00006A	10:1	Screw with Locknut	1740-5075	3045	None	Nitrile

Product Questions & Answers (1)

Question by: Kent E on May 20, 2025, 9:05 AM

Hey, can you mount these counterbalance valves any ol' way, or does it matter which direction they go?

Answer by: Customer Support on May 21, 2025, 3:20 PM

Installation-wise, you've got unrestricted mounting positions with these 1CE30 series valves. Just torque the cartridge to 33 ft-lbs into the cavity, and you should be good to go.