Skip to the beginning of the images gallery

DANFOSS / EATON ADAPTERS

Description & Features

Eaton Aeroquip adapters are suitable for a variety of demanding applications, including marine, military, chemical processing, pulp and paper, food and beverage, and off-shore drilling.

These DANFOSS / EATON ADAPTERS are constructed of carbon steel with Dura-Kote plating for enhanced corrosion resistance. Design flexibility is assured with hundreds of styles to choose from. These SAE 37° male/SAE 37° male 90° elbow adapters meet SAE 070201 standards and offer higher operating pressures above SAE standards.

This elbow adapter features a 0.75 male end size 1 and a 0.5625 male end size 2. It is designed to perform in temperatures as low as -65 degrees.

SKU: 2039-8-6S

Supplier Part Number (MPN): 2039-8-6S

Alternate Part Numbers: C1DV62, MI-00313577, MINO-00015F62200

Specifications

Brand Aeroquip® by Danfoss	Connection Size 1 1/2 in	Connection Size 2 3/8 in	Connection Type Male JIC	Connection Type 1 Male SAE 37 deg JIC Flare	Connection Type 2 Male SAE 37 deg JIC Flare	Dimension Standards SAE 070201/J514	Drop Dimensions 1.14 in	Finish Dura-Kote™	Fitting Type 90 deg Elbow	Material Steel	Material Construction Carbon Steel	nmfc 50	Operating Temperature -65	Series 2039 Series	Thread Size 3/4-16, 9/16-16	Tube OD 3/8 in

Similar Products

Model Number	Connection Size 1	Connection Type 1	Connection Size 2	Thread Size
2039-6-6S Steel Male JIC 90 deg Elbow	3/8 in	Male SAE 37 deg JIC Flare	3/8 in	9/16-18
2039-12-12S Steel Male JIC 90 deg Elbow	3/4 in	Male SAE 37 deg JIC Flare	3/4 in	1-1/16-12
2039-10-10S Steel Male JIC 90 deg Elbow	5/8 in	Male SAE 37 deg JIC Flare	5/8 in	7/8-14
2039-20-20S Steel Male JIC 90 deg Elbow	1-1/4 in	Male SAE 37 deg JIC Flare	1-1/4 in	1-5/8-12
2039-4-4S Steel Male JIC 90 deg Elbow	1/4 in	Male SAE 37 deg JIC Flare	1/4 in	7/16-20
2039-16-16S Steel Male JIC 90 deg Elbow	1 in	Male SAE 37 deg JIC Flare	1 in	1-5/16-12
2039-8-8S Steel Male JIC 90 deg Elbow	1/2 in	Male SAE 37 deg JIC Flare	1/2 in	3/4-16
2039-5-5S	5/16 in	Male SAE 37 deg JIC Flare	5/16 in	1/2-20
2039-16-12S	1 in	Male 37 deg JIC Flare	3/4 in	1-5/16-12 x 1-1/16-12
2039-24-24S	1-1/2 in	Male SAE 37 deg JIC Flare	1-1/2 in	1-7/8-12
2039-32-32S	2 in	Male SAE 37 deg JIC Flare	2 in	2-1/2-12

Product Questions & Answers (2)

Question by: Debbie F on Feb 12, 2026, 6:57 AM

What kind of stuff is this Eaton adapter good for? I work in a paper mill, and things get pretty corrosive.

Answer by: Customer Support on Feb 13, 2026, 7:47 AM

Designed for robust performance, these adapters are often found in chemical processing, pulp and paper, and even marine/military applications where corrosion resistance is key. The Dura-Kote plating helps a lot.

Question by: Roger R on Dec 11, 2025, 10:16 AM

Both ends on this are SAE 37 male fittings, right? Trying to figure out if it'll work between two female ports on a hydraulic line I'm redoing.

Answer by: Customer Support on Dec 13, 2025, 8:34 AM

Correct on both counts. The 2039-8-6S has SAE 37 degree male ends on each side, so it bridges two female SAE 37 ports. One end is 3/4 inch and the other steps down to 9/16 inch, so keep that size difference in mind when you're planning the connection. The 90 degree elbow geometry also gives you some routing flexibility if space is tight around the fitting area.

DANFOSS / EATON ADAPTERS

Description & Features

Specifications

Related Documents

Similar Products

Product Questions & Answers (2)