Skip to the beginning of the images gallery

#6 MJIC BLKHD 45* NO NUT

Description & Features

This forged steel #6 MJIC BLKHD 45* NO NUT features male JIC 37-degree flare threads on both ends, manufactured to SAE J514 specifications.

With a centerline length of 0.830 mm and an overall length of 1.670 mm, this fitting is suitable for various hydraulic applications. Each thread has a 9/16-18 size and a drill size of 0.297 mm.

SKU: 2702-06-06-FG

Supplier Part Number (MPN): 2702-06-06-FG

Alternate Part Numbers: 2702-06-06

Specifications

Brand BRENNAN	Connection Size 1 3/8 in	Connection Size 2 3/8 in	Connection Type Male JIC	Connection Type 1 Male SAE 37 deg JIC Flare	Connection Type 2 Male SAE 37 deg JIC Flare	Dimension Standards MS 51509, SAE J514	Finish Trivalent Zinc-Plated	Fitting Type 45 deg Elbow	Hex Size 0.563 in	l Dimensions 1.67 in	Material Steel	Material Construction AISI 1045 Steel	Maximum Operating Pressure 6000 psi	Series 2702-FG Series	Thread 2 Drill Dimensions 0.297 in	Thread B1 Drill Dimensions 0.297 in	Thread Size 9/16-18

Similar Products

Model Number	Connection Size 1	Connection Size 2	Thread Size	Hex Size
2702-04-04-FG	1/4 in	1/4 in	7/16-20	7/16 in
2702-05-05	5/16 in	5/16 in	1/2-20	0.563 in
2702-10-10	5/8 in	5/8 in	7/8-14	7/8 in
2702-12-12-FG	3/4 in	3/4 in	1-1/16-12	1.06 in
2702-16-16-FG	1 in	1 in	1-5/16-12	1.312 in
2702-24-24-FG	1-1/2 in	1-1/2 in	1-7/8-12	1-7/8 in

Product Questions & Answers (3)

Question by: Duane K on Dec 3, 2025, 9:59 AM

Will this fitting hold up okay in a hydraulic system for a log splitter? I don't want anything that's gonna leak or crack under pressure.

Answer by: Customer Support on Dec 4, 2025, 2:18 PM

Forged steel construction gives this fitting good strength for hydraulic applications. Just be sure the pressure rating of your splitter is within what the fitting material can handle.

Question by: Ralph H on May 30, 2025, 7:04 PM

got a bulkhead setup with 9/16-18 JIC on both sides. is this the 45 degree elbow that fits that?

Answer by: Customer Support on Jun 1, 2025, 5:57 PM

With 9/16-18 male JIC 37 degree flare threads on both ends, it matches a #6 MJIC to #6 MJIC bulkhead 45 degree elbow style and is built to SAE J514.

Question by: Jean P on Aug 17, 2025, 1:02 PM

both ends on this fitting are male JIC? trying to figure out if i need a nut on each side or if thats handled some other way

Answer by: Customer Support on Aug 18, 2025, 7:10 PM

Correct on the thread type. Both ends are male JIC 37-degree flare, 9/16-18, built to SAE J514. The "NO NUT" in the name means the bulkhead nuts are not included with this fitting, so you'll need to source those separately to secure it through a panel or bulkhead wall. The fitting itself handles the 45-degree angle and the bulkhead pass-through, but the clamping hardware is on you to supply.

#6 MJIC BLKHD 45* NO NUT

Description & Features

Specifications

Related Documents

Similar Products

Product Questions & Answers (3)