The 2PE Series Aluminum Gear Pump delivers a displacement of 1.15 cu in/rev and a rated flow of 8.5 GPM. This Salami gear pump offers high volumetric efficiency through innovative design and precise machining tolerances.
This single hydraulic gear pump features a 2-Bolt SAE A mounting flange, an 11 Tooth SAE A splined shaft, an SAE -12 inlet, and an SAE -10 outlet. It is designed for clockwise rotation but rotation can be reversed. Pressure ratings include a 3140 PSI pressure rating, with inlet pressure ranging from 7.38 in. Hg to 21.7 PSI and peak pressures up to 4350 PSI.
This pump is compatible with a range of hydraulic fluids, with a normal operating range of 85 SUS to 297 SUS. It is designed for a continuous speed of 3000 RPM, with intermittent speeds up to 4000 RPM.
SKU: 612035142
Supplier Part Number (MPN): 612035142
Alternate Part Numbers: 2PE19D-R54S2, C1MR30
Loading related products…
Specifications
Brand
Salami
Dimensions
6.018 in L x 5.188 in W x 4.44 in H
Grp Pressure Limit
Inlet Pressure - 7.38 inHg to 21.7 psi, Pump Outlet - Continuous Working Pressure Varies with Displacement, Peak Pressure Pressures up to 4350 psi
Minimum Operating Fluid Viscosity - 66 SSU (with 80% Reduction of Working Pressure and at Minimum Speed) to 3635 SSU (Maximum Starting Viscosity), Normal Operating Range - 85 SSU to 297 SSU
pump says CW rotation on it -- can that be switched around if my setup runs the other direction?
Answer by: Customer Support on Apr 21, 2025, 6:39 AM
Rotation on these pumps can be reversed by swapping the position of the drive shaft and driven shaft and rotating the front flange. It's not a permanent configuration, so if your power unit runs counterclockwise you're not stuck buying a different unit. Just make sure the change is made before installation and that everything is reseated properly before you put it to work.