Designed for reliability and performance the SALAMI S.p.A 2PE Series Aluminum Gear Pump 0.84 cu in/rev offers a robust solution for industrial applications. This gear pump features a 2-Bolt SAE A Mounting Flange and an 11 Tooth SAE A Splined Shaft ensuring easy integration into existing setups.
With a displacement of 0.84 cu in/rev and SAE -12 Inlet SAE -10 Outlet ports this gear pump is engineered for high volumetric efficiency. Axial compensation through floating bushings ensures consistent efficiency across the working pressure range.
The pump operates at a continuous pressure rating of up to 3600 PSI and can handle intermittent speeds up to 4000 RPM. The unit's clockwise rotation can be altered by reversing the shaft positions and rotating the front flange adding versatility.
Fabricated according to European German and American standards the SALAMI gear pump provides options for various shafts flanges and ports. Bearings featuring DU material allow for high-pressure capability supporting demanding industrial environments.
Adhere to recommended filtration standards ISO 4406 for pressures below and above 2900 PSI. The temperature rating ranges from -4deg;F to 230deg;F depending on the seal type used.
Supplier Part Number: 612036832
Loading related products…
Specifications
Brand
Salami
Dimensions
5.548 in L x 5.188 in W x 4.44 in H
Grp Pressure Limit
Inlet Pressure - 7.38 inHg to 21.7 psi, Pump Outlet - Continuous Working Pressure Varies with Displacement, Peak Pressure Pressures up to 4350 psi
Minimum Operating Fluid Viscosity - 66 SSU (with 80% Reduction of Working Pressure and at Minimum Speed) to 3635 SSU (Maximum Starting Viscosity), Normal Operating Range - 85 SSU to 297 SSU
Will this gear pump bolt right up to a standard SAE A mount without any fiddling?
Answer by: Customer Support on Aug 14, 2025, 2:38 PM
This gear pump is designed with a standard 2-Bolt SAE A Mounting Flange, so it should integrate easily into existing setups that adhere to this standard.
Question by: Dean T on Jan 27, 2026, 1:07 PM
rotation on this one is clockwise out of the box, but can it be flipped to run CCW if my setup needs it?
Answer by: Customer Support on Jan 29, 2026, 6:52 AM
Clockwise is how it ships, but the rotation can be changed. You'd reverse the positions of the drive shaft and driven shaft, then rotate the front flange. No special parts needed, just a reconfiguration of what's already there.