SALAMI S.p.A offers a high-performing solution with its gear pump tailored for demanding industrial needs.
This unit features a 2-Bolt SAE A mounting flange and a 9 tooth SAE A splined shaft to ensure reliable and stable connections. Its displacement of 0.68 cu in/rev is engineered for efficiency and precision.
Designed for optimal performance the pump sustains continuous speed at working pressure up to 3500 RPM with an intermittent capability reaching 4000 RPM.
Equipped with SAE -12 inlet and SAE -10 outlet ports the pump ensures streamlined fluid transfer while the clockwise rotation supports consistent functionality.
The robust pressure rating allows operations at 3600 PSI with peak pressures up to 4350 PSI. The innovative design includes floating bushings and DU bearings enabling high volumetric efficiency and pressure capability.
Suitable for multiple configurations this unit offers various shafts flanges and ports adhering to European German and American standards.
MPN: 612079042
Loading related products…
Specifications
Brand
Salami
Dimensions
5.4 in L x 5.188 in W x 4.44 in H
Grp Pressure Limit
Inlet Pressure - 7.38 inHg to 21.7 psi, Pump Outlet - Continuous Working Pressure Varies with Displacement, Peak Pressure Pressures up to 4350 psi
Minimum Operating Fluid Viscosity - 66 SSU (with 80% Reduction of Working Pressure and at Minimum Speed) to 3635 SSU (Maximum Starting Viscosity), Normal Operating Range - 85 SSU to 297 SSU
runs about 3500 RPM continuous on my skid steer loader setup, this pump gonna hold up at that speed or is that pushing it?
Answer by: Customer Support on May 7, 2025, 6:18 AM
3500 RPM is right at the continuous rated speed for this pump, so you're running it right at its design limit, not beyond it. It can handle intermittent bursts up to 4000 RPM if your system spikes occasionally, but for steady sustained use, staying at or just under 3500 keeps things in the safe zone. The floating bushing design helps maintain volumetric efficiency across the working pressure range, so you're not sacrificing output just because you're running it hard. As long as your fluid viscosity stays in the normal operating range of 85 to 297 SUS and your filtration meets the ISO 4406 spec, this unit should hold up fine at that duty level.