2PE Series Aluminum Gear Pump, 0.68 cu in/rev, 2-Bolt SAE A Mounting Flange, 5/8 St. Keyed x 1.25, SAE A Shaft, SAE -12 Inlet, SAE -10 Outlet, CW Rotation
2PE Series Aluminum Gear Pump, 0.68 cu in/rev, 2-Bolt SAE A Mounting Flange, 5/8 St. Keyed x 1.25, SAE A Shaft, SAE -12 Inlet, SAE -10 Outlet, CW Rotation
Engineered by Salami Hydraulics NA Inc this advanced gear pump is a robust solution for industrial hydraulic applications. The gear pump with 0.68 cu in/rev displacement ensures reliable performance across a broad range of pressures and speeds making it vital for demanding environments.
Featuring a 2-bolt SAE A mounting flange this gear pump comes equipped with a 5/8 St. Keyed x 1.25 SAE A Shaft. The configuration includes a SAE -12 Inlet and SAE -10 Outlet enhancing fluid handling capabilities. This model operates in a clockwise rotation.
Salami S.p.A gear pumps offer high volumetric efficiency through their innovative design and precise control of machining tolerances. Axial compensation is achieved using floating bushings maintaining high efficiency throughout the pressure range. The DU bearings provide high pressure capability ensuring sustained performance.
Optimal performance is supported by an inlet pressure range of 7.38 in. Hg to 21.7 PSI with peak pressures up to 4350 PSI. Recommended fluid viscosity ranges from 66 SUS to 3635 SUS maintaining efficiency under various operating conditions. Temperature ratings also vary depending on seal type extending usability in diverse environments.
Supplier Part Number: 612081672
Loading related products…
Specifications
Brand
Salami
Dimensions
5.264 in L x 5.188 in W x 4.44 in H
Grp Pressure Limit
Inlet Pressure - 7.38 inHg to 21.7 psi, Pump Outlet - Continuous Working Pressure Varies with Displacement, Peak Pressure Pressures up to 4350 psi
Minimum Operating Fluid Viscosity - 66 SSU (with 80% Reduction of Working Pressure and at Minimum Speed) to 3635 SSU (Maximum Starting Viscosity), Normal Operating Range - 85 SSU to 297 SSU
pump says CW rotation, is that something that can be swapped out if my setup runs the other way?
Answer by: Customer Support on Apr 7, 2025, 6:37 AM
Rotation on these Salami gear pumps can actually be changed without sourcing a whole new unit. You swap the positions of the drive shaft and driven shaft, then rotate the front flange, and that flips the rotation direction. So if your system runs counterclockwise, it's a field-adjustable change rather than a reason to order a different pump.