2PE Series Aluminum Gear Pump, 1.15 cu in/rev, 2-Bolt SAE A Mounting Flange, 5/8 St. Keyed x 1.25, SAE A Shaft, SAE -12 Inlet, SAE -10 Outlet, CW Rotation
2PE Series Aluminum Gear Pump, 1.15 cu in/rev, 2-Bolt SAE A Mounting Flange, 5/8 St. Keyed x 1.25, SAE A Shaft, SAE -12 Inlet, SAE -10 Outlet, CW Rotation
Designed for mobile and industrial hydraulic circuits, the 2PE Series Aluminum Gear Pump delivers 1.15 cu in/rev displacement at a rated speed of 3000 RPM and a continuous working pressure of 3140 PSI. The aluminum housing keeps weight low while maintaining structural integrity across a broad operating range.
This pump features a 2-Bolt SAE A mounting flange with a 5/8 in. straight keyed shaft (1.25 in. length, SAE A), SAE -12 inlet, and SAE -10 outlet ports. Clockwise rotation is standard; rotation can be reversed by repositioning the drive and driven shafts and rotating the front flange. Floating bushings provide axial compensation for consistent volumetric efficiency across the working pressure range, while DU bearings support high-pressure capability.
Standard Buna-N seals are rated for -4°F to 185°F. The pump is compatible with fluids in the 85–297 SUS normal viscosity range and suits systems requiring ISO 4406 cleanliness levels. Multiple unit configurations and alternative shaft, flange, and port options are available from Salami Hydraulics.
SKU: 612081702
Supplier Part Number (MPN): 612081702
Alternate Part Numbers: 2PE19D-R82S2, C1MR48
Loading related products…
Specifications
Brand
Salami
Dimensions
5.884 in L x 5.188 in W x 4.44 in H
Grp Pressure Limit
Inlet Pressure - 7.38 inHg to 21.7 psi, Pump Outlet - Continuous Working Pressure Varies with Displacement, Peak Pressure Pressures up to 4350 psi
Minimum Operating Fluid Viscosity - 66 SSU (with 80% Reduction of Working Pressure and at Minimum Speed) to 3635 SSU (Maximum Starting Viscosity), Normal Operating Range - 85 SSU to 297 SSU
trying to match up a pump here, is this one the 2-bolt SAE A mount with a 5/8 keyed SAE A shaft
Answer by: Customer Support on Nov 8, 2025, 9:30 AM
It’s set up with a 2-bolt SAE A mounting flange and a 5/8 straight keyed shaft that’s 1.25 inches long, listed as an SAE A shaft. Ports are SAE -12 on the inlet and SAE -10 on the outlet, and the rotation is clockwise as stocked.
Question by: Travis B on Feb 18, 2026, 1:03 PM
What kind of fluid should I be using in this pump?
Answer by: Customer Support on Feb 19, 2026, 7:24 PM
This gear pump works best with fluid viscosities between 85 SUS and 297 SUS for normal operation. You can go as low as 66 SUS if you’re willing to reduce the working pressure and run it at a lower speed.
Question by: Tammy Y on Jun 8, 2025, 7:27 AM
runs clockwise out of the box, right? just want to make sure before i go bolting it up to my PTO setup
Answer by: Customer Support on Jun 10, 2025, 8:42 AM
Clockwise rotation is standard on this pump. If you ever need to flip it to counterclockwise, that can be done by swapping the drive and driven shaft positions and rotating the front flange. No special parts required for that change.