2PE Series Aluminum Gear Pump, 1.58 cu in/rev, 2-Bolt SAE A Mounting Flange, 5/8 St. Keyed x 1.25, SAE A Shaft, SAE -12 Inlet, SAE -10 Outlet, CW Rotation
2PE Series Aluminum Gear Pump, 1.58 cu in/rev, 2-Bolt SAE A Mounting Flange, 5/8 St. Keyed x 1.25, SAE A Shaft, SAE -12 Inlet, SAE -10 Outlet, CW Rotation
The 2PE Series Aluminum Gear Pump from Salami S.p.A. is engineered for industry-specific applications, delivering a displacement of 1.58 cu in/rev with a maximum pressure rating of 2600 PSI.
Featuring a 2-bolt SAE A mounting flange and CW rotation, this pump incorporates a 5/8 St. Keyed x 1.25 SAE A shaft, an SAE -12 inlet port, and an SAE -10 outlet port. The sturdy DU bearings ensure reliable performance under high pressure conditions.
Salami gear pumps are designed with innovative axial compensation and floating bushings to maintain high volumetric efficiency across the pressure spectrum. The pressure limit for the inlet ranges from 7.38 in. Hg to 21.7 PSI, with outlet pressures reaching up to 4350 PSI.
Suitable for a variety of industrial settings, the 612081722 model supports continuous speeds up to 2500 RPM and intermittent speeds up to 4000 RPM. The pump is compatible with recommended filtration ISO 4406 and operates efficiently with fluid viscosities from 66 SUS to 3635 SUS.
Temperature ratings vary based on seal type, with Buna-N seals supporting -4deg;F to 185deg;F and FPM (Viton) seals extending to 230deg;F.
MPN: {{ecc_mpn}}
Supplier Part Number: 612081722
Loading related products…
Specifications
Brand
Salami
Dimensions
6.334 in L x 5.188 in W x 4.44 in H
Grp Pressure Limit
Inlet Pressure - 7.38 inHg to 21.7 psi, Pump Outlet - Continuous Working Pressure Varies with Displacement, Peak Pressure Pressures up to 4350 psi
Minimum Operating Fluid Viscosity - 66 SSU (with 80% Reduction of Working Pressure and at Minimum Speed) to 3635 SSU (Maximum Starting Viscosity), Normal Operating Range - 85 SSU to 297 SSU
What kind of fluid should I be using in this pump?
Answer by: Customer Support on Sep 21, 2025, 6:53 AM
Recommended fluids should have a viscosity between 85 and 297 SUS for normal operation. You can get away with 66 SUS if you drop the working pressure and speed way down, but don't go over 3635 SUS when you're starting it up.
Question by: Tommy A on Aug 7, 2025, 1:14 PM
trying to swap a pump out on a 2-bolt SAE A mount. is this one set up for clockwise rotation and what ports does it have
Answer by: Customer Support on Aug 8, 2025, 4:06 PM
For fit and hookup, it comes with a 2-bolt SAE A mounting flange and it is stocked in clockwise (CW) rotation. Porting on this model is SAE -12 on the inlet and SAE -10 on the outlet, with a 5/8 in keyed SAE A shaft (1.25 in long).