Skip to the beginning of the images gallery

DANFOSS / EATON SYNFLEX 100R7 250 FT/BOX 2 PCS

Description & Features

This Eaton Aeroquip Synflex 3TR7 Series thermoplastic hydraulic hose is designed for general hydraulic, material handling, chemical transfer, and marine steering applications. The DANFOSS / EATON SYNFLEX 100R7 250 FT/BOX 2 PCS features a polyurethane cover, providing high abrasion resistance and preventing absorption of most oils and fluids.

Constructed with a 1-ply braid and synthetic fiber reinforcement, this -5 dash size hose is both conductive and perforated. The tube is made of nylon, offering a minimum bend radius of 1.5 inches and a minimum working temperature of -40 degrees. It is also significantly lighter than equivalent wire braided rubber hoses.

SKU: 3TR7-05-250BX

Supplier Part Number (MPN): 3TR7-05-250BX

Alternate Part Numbers: 3130-05-250BX

Specifications

Abrasion Resistance 29	Alternate Part Numbers Alternate Part Number 3130-05-250BX, Alternate Part Number MINO-00015X06154	Application General hydraulics, material handling, chemical transfer, marine steering.	Color Black	Conductivity 30	Construction 1 Ply Braid	Cover Material Polyurethane	Cover Style Perforated	Dash Size -5	Brand Danfoss Power Solutions (II LLC Aeroquip)	Brand Aeroquip	Pack Size 12.00	UOM FT	Features Highly abrasion resistant cover\|Prevents absorption of most oils and fluids\|2X lighter than equivalent wire braided rubber hoses	ICC Hoses and Flexible Tubes	Language English	Lay Line Style Ink Jet	Minimum Bend Radius 1.50	Minimum Working Temperature -40	Net Pack Quantity Units FT	Product Width 0.57	Reinforcement Material Synthetic fiber	Sub Brand Synflex	Supplier Part Number 3TR7-05-250BX	Tube Material Nylon	Product Weight 0.19 lbs

Product Questions & Answers (3)

Question by: Connie B on Mar 6, 2026, 8:31 PM

What kind of stuff is this hose good for? Just curious if it'll hold up to what I'm doing.

Answer by: Customer Support on Mar 8, 2026, 8:12 AM

Application-wise, this Synflex hose is designed for general hydraulic systems, material handling, chemical transfer, and even marine steering. So it's pretty versatile.

Question by: Freddie B on Jun 15, 2025, 2:41 PM

got a tight spot to route hose, what’s the smallest bend i can get away with on this 100R7?

Answer by: Customer Support on Jun 16, 2025, 6:45 PM

For routing, the minimum bend radius on this Synflex 3TR7 (-5) hose is 1.5 inches. Staying at or above that radius helps keep the nylon tube from kinking when you snake it through a cramped area.

Question by: Warren P on Nov 8, 2025, 8:32 AM

hose says it's rated down to -40 degrees -- does that mean it'll hold up okay in a freeze/thaw situation where temps swing around a good bit through the season?

Answer by: Customer Support on Nov 10, 2025, 6:30 AM

Cold flexibility down to -40 is built into the nylon tube and polyurethane cover on this hose, so repeated freeze/thaw cycling is well within the range it was built to handle. The thermoplastic construction doesn't stiffen and crack the way rubber hoses tend to in those conditions. That said, the -40 figure is the minimum working temperature floor, not just a storage spec, so you've got real operating margin there for seasonal swings.