4000 Series Geroler Motor, 9.90 cu in/rev, 4 Bolt SAE B Mounting Flange, 1-1/4 in. Straight Keyed Shaft, 1-1/16-12 St.Thd. O-Ring Ports,

The Danfoss / Eaton Char-Lynn 4000 Series Disc Geroler Standard motor features a displacement of 9.90 cubic inches per revolution ideal for applications such as mowing snow removal sprayers trenchers and wood products. Engineered with a 4 Bolt SAE B mounting flange and a 1-1/4 inch straight keyed shaft this motor ensures a secure fit and robust performance.

Providing one of the lowest pressure drops in the industry this highly-efficient geroler motor helps achieve significant energy savings. It utilizes 1-1/16-12 Standard Thread O-Ring Staggered Ports designed for optimal fluid dynamics.

The torque rating stands at 485 newton meters supporting demanding industrial applications. For best motor life it is recommended to run the motor at 30% of the rated pressure for approximately one hour before application to full load.

Ideal for fluids with a minimum viscosity of 70 SUS at operating temperature the motor operates within a recommended range of 100-200 SUS. Ensure continuous operation under high pressure by using an external case drain line if the motor is exposed to continuous back pressure exceeding 1500 PSI.

MPN: C1JW75

Supplier Part Number: 109-1102-006