Skip to the beginning of the images gallery

Aluminum Cam & Groove Adapter, Male Half, Inch Hose Shank

Description & Features

Designed for high-performance liquid handling, this Aluminum Cam & Groove Adapter, Male Half, Inch Hose Shank from Can Industrial Inc is engineered with durability and efficiency in mind. The adapter features a robust Aluminum A356 or A104 body and comes with brass cam levers, providing resilience in demanding industrial applications. Plated steel is used for pins, rings, and safety clips, ensuring long-lasting reliability.

Exceptional interchangeability is a key feature, as it is compatible with all products produced to standard A-A-59326 or DIN 2828, though interchangeability for 1/2rdquo; and 8rdquo; sizes is not guaranteed. Pressure ratings are set at 150 PSI for sizes 1/2rdquo; - 4rdquo; and 75 PSI for sizes 5rdquo; to 8rdquo;. Seals are crafted from high-quality Buna-N for optimal performance.

The adapter is designed for ease of use: simply slide the adapter into the coupler and press the cam levers down with normal hand pressure to couple, and lift the cam arms to uncouple. Female couplers with cast-in lugs can accommodate safety pins, preventing accidental uncoupling.

It is crucial to note that Cam & Groove Couplings should not be employed with compressed air or steam service. This product is primarily intended for liquid applications.

Supplier Part Number: ALE-600

Specifications

Brand Sunrise	Connection Size 1 6 mm	Connection Size 2 6 mm	Connection Type Male Adapter, Hose Shank	Connection Type 1 Male Adapter	Connection Type 2 Hose Shank	Dimension Standards AA-59326, DIN 2828	Fitting Type Adapter	Material Aluminum	Material Construction A104/A356 Aluminum	Maximum Operating Pressure 75 psi	Sg Operation To Couple - Slide the Adapter into the Coupler and with Normal Hand Pressure, Press the Cam Levers Down, to Uncouple - Lift the Cam Arms and Remove the Adapter from the Coupler	Sg Safety Pin Feature Female Couplers with This Feature Have Cast-in Lugs That Allow Safety Pins to be Attached Once the Lugs are Passed Through Slots in the Special Cam Lever Arms, These Pins Prevent the Coupler from Being Uncoupled Until They are Removed	Sg Specifications Interchangeability - Interchanges with All Products Produced to Standard A-A-59326 (Superseding Mil-C-27487f) or DIN 2828, (No Standard Exists for 1/2 in and 8 in Sizes, Generally These Sizes Do not Interchange with Other Manufacturers), Pressure Ratings

Similar Products

Model Number	Size	Price	Action
ALE-100 Aluminum Cam & Groove Shank Adapter
ALE-150 Aluminum Cam & Groove Shank Adapter
ALE-200 Aluminum Cam & Groove Shank Adapter
ALE-300 Aluminum Cam & Groove Shank Adapter
ALE-400 Aluminum Cam & Groove Shank Adapter
ALE-075 Aluminum Cam & Groove Shank Adapter
ALE-125 Aluminum Cam & Groove Shank Adapter
ALE-250 Aluminum Cam & Groove Shank Adapter

Product Questions & Answers (3)

Question by: Warren M on Jul 25, 2025, 11:40 AM

this fitting safe to run compressed air through? got a pneumatic setup and tryin to figure out if it'll work for what we need.

Answer by: Customer Support on Jul 27, 2025, 8:50 AM

Cam and groove couplings like this one are not rated for compressed air service, period. Same goes for steam. Liquid applications only. If you're running a pneumatic system, you'll need a different style of coupling altogether.

Question by: Pete R on Oct 8, 2025, 5:28 PM

what sizes run at 150 PSI with these cam lock fittings, and do the bigger ones drop off on pressure?

Answer by: Customer Support on Oct 10, 2025, 7:20 AM

Anything from half inch up through 4 inch is rated at 150 PSI. Once you get into the 5 inch through 8 inch range, the pressure rating drops to 75 PSI. So yes, the larger sizes do carry a lower rating, which is worth keeping in mind if you're sizing these for a high-flow liquid transfer setup.

Question by: Lynn M on Aug 23, 2025, 9:23 PM

Trying to match up parts here. will this male cam lock interchange with other brands or am i stuck with one maker?

Answer by: Customer Support on Aug 25, 2025, 3:05 PM

Interchangeability is built in for standard sizes. It interchanges with products made to A-A-59326 or DIN 2828. The catch is the 1/2 inch and 8 inch sizes since no standard exists there, so those generally do not interchange with other manufacturers.