SAME DAY SHIPPING
— Order by 2pm EST.
Toggle Nav
Cart
Search
main product photo

DG4V-3 Series Subplate/Manifold Mount NFPA Size D03 Soft Shift Solenoid Valve, 4-Way, 3-Position, Spring Centered, Float Center, High Performance, 24VDC DIN 43650 Coils.

Ask A Question

Description & Features

Designed for efficient flow control, the DG4V-3 Series Subplate/Manifold Mount NFPA Size D03 Soft Shift Solenoid Valve is highly suitable for applications including die casting, machine tool, and marine/offshore operations. This 4-way, 3-position valve is spring-centered with a float center mechanism, ensuring dependability and precision.

Constructed from durable gray iron, it features a single-stage design with standard performance metrics and a maximum flow rate of 8 GPM at 3000 PSI. This valve employs DC solenoids to prevent coil burnout and has a controlled spool shift speed.

Equipped with 24VDC DIN 43650 coils, the valve includes characteristics such as a fixed, non-serviceable metering orifice, and a molded coil that is resistant to moisture and dirt. Additionally, the valve integrates a wet armature design for quiet functioning and longevity with zero dynamic seal leakage.

Mounting is straightforward on industry-standard surfaces. The valve operates under fluid cleanliness levels of 19/17/14 micron and has a temperature range of 20deg;F to 180deg;F.

Model Number: DG4V-3-6C3-M-U-HH7-60

Supplier Part Number: 02-391668

Ideal for usage in press systems, primary metals, paper processing, and turbine control, this hydraulic valve meets rigorous industry standards, making it a versatile solution for various industrial needs.

Specifications

Brand
Vickers by Danfoss
Actuation Identification
Solenoid A, Solenoid B
Actuator Type
Solenoid
Body Material
Iron
Build Orientation
Solenoid at A Port End, Solenoid at B Port End
Check Valve
Without Check Valve
Color
Gray
Design
60 Series
Design Code
60 Series
Dimensions
6.14 in L x 1.8 in W x 3.57 in H
Diode
Without Diode
Domestic/Import
Domestic
grp Maximum Flow Rating 3000 psi
8 gpm
grp Transient Conditions During Shift
P and A Blocked, B Open to T, P and B Blocked, A Open to T
Indicator Light
Without Indicator Light
Manual Override
Plain
Media
Petroleum Oil
Number of Stages
1
Performance
Standard
Reducer Module
Without Reducer Module
Seal Material
FKM
Segment Code
B
Series
DG4V-3 60 Series
Sg Available Options
Restrictor Plugs are Available for Use in Ports P, T, A Or B. These Can be Used for Restricting Flow or for Circuit Dampening. Restrictor Plugs are Not Recommended for Use Above 3000 psi
Sg Bleeding Procedure
Apply a Minimum of 50 psi Tank Pressure. Shift Either Solenoid. Loosen Manual Actuators in Solenoid Ends Until Air is Evacuated. Tighten Manual Actuators. No Further Bleeding Should be Required
Sg Features
High Reliability. High Pressure and Flow Capability. Low Pressure Drops. FKM Seal. Scratch-Proof Manual Override. Coil Change With Valve in Place. ISO 4401 Size 03, NFPA D03 Port Interface
Sg How It Works
Spools with Contoured or Notched Lands are Used to Provide Maximum Control of Flow Rate Change as the Spool is Shifted. DC Solenoids Prevent Coil Burnout During Controlled Rate of Solenoid Shift. Spool Shift Speed is Controlled by a Fixed, Non-Serviceable
Sg Maximum Flow Rating
Dependent On Spool/Spring Combination and Coil
Sg Maximum Operating Pressure
Ports P, A and B 5075 psi, Port T 3045 psi with Petroleum Oil, 1000 psi with High Water Base Fluids. (Caution: Pressures Over 3000 psi Require Steel Subplate or Manifold)
Sg Mounting Bolts
Standard Mounting Bolts are 4 EA 1/4-20 x 1-1/2 Grade 8 Socket Head Cap Screws (Vickers Bolt Kit 255633), Torqued To 112 lb-in. Maximum with Threads Lubricated. See Bolt Kits On
Shift Type
Fixed
Spool Center Condition
A Port and Double Offset Sensing Switch on B Port
Spool Position Monitor
Without Spool Position Monitor
Spool Type
Spool 6
Spring Arrangement
Spring Centered
Surge Suppressor Damper
Without Surge Suppressor Damper
Switch Connector
Without Switch Connector
Valve Mount Type
Subplate/Manifold

Product Questions & Answers (2)

Question by: Stan S on Jan 16, 2026, 6:15 AM
what's the tank port pressure rating on this valve, and do i need anything special for the subplate if we're running close to max?
Answer by: Customer Support on Jan 18, 2026, 6:55 AM
Tank port on this one is rated to 3045 PSI, while ports P, A, and B can handle up to 5075 PSI. One thing worth knowing before you mount it up: anything running above 3000 PSI requires a steel subplate or manifold. Gray iron won't cut it at those pressures. Standard mounting uses four 10-24 x 1-1/4 Grade 8 socket head cap screws, torqued to 44-62 lb-in with lubricated threads. Keep that torque range in mind since going over it can cause problems just as much as going under.
Question by: Terry P on Jan 31, 2026, 9:17 PM
got a D03 subplate setup already. will this DG4V-3 soft shift valve bolt right on, or am i gonna be drilling new holes
Answer by: Customer Support on Feb 2, 2026, 6:14 AM
Fit is based on the ISO/DIS 4401-AB-03 D03 interface, and it is made to mount on industry-standard D03 subplate or manifold surfaces. It is a subplate and manifold mount valve, so you should not need any special mounting pattern beyond the standard D03 surface.

Tell us what you need and we'll get back to you.

Fields marked * are required.