Skip to the beginning of the images gallery

Double Wire Braid SAE 100R2AT Hose, 0.75 Inch ID, Up to 3125.00 PSI

Description & Features

This Eaton Aeroquip GH793 MatchMate Double Wire Braid Hose (C1CX69) is rated for working pressures up to 3,125 PSI and built for demanding hydraulic applications. The 0.75 inch (–12 dash size) inner diameter and two-ply wire braid construction handle petroleum-based fluids, water-glycol base fluids, lubricating oils, and water across general industrial hydraulic service.

The PVC/nitrile blend cover provides standard abrasion resistance and the hose is electrically conductive, making it suitable where static charge dissipation is required. Burst pressure reaches 12,500 PSI with Global fittings; other fitting types carry a 9,000 PSI burst rating. This hose meets SAE 100R2AT standards and is part of the Eaton Aeroquip GH793 MatchMate series.

SKU: GH793-12R250

Supplier Part Number (MPN): GH793-12R250

Alternate Part Numbers: C1CX69, GH793-12-100, GH793-12-50, MI-00352074, MINO-00015F86354

Specifications

Abrasion Resistance 29	Application Hydraulic systems with petroleum and water-glycol base fluids, for lubricating oils and water.	Burst Pressure Note Rating applies for Global fittings only. For other fittings, rating decreases to 9000 PSI	Color Black	Conductivity 30	Construction 2-ply braid	Cover Material PVC/nitrile blend	Dash Size -12	Brand Danfoss Power Solutions (II LLC Aeroquip)	Brand Aeroquip	Pack Size 12.00	UOM FT	Hose I.D. 0.75	Hose O.D. 1.16	Lay Line Style Transfer Tape	Maximum Operating Pressure 3125	Minimum Bend Radius 9.50	Minimum Bend Radius 9.5	Minimum Working Temperature -40	Operating Pressure Note Rating applies for Global fittings only. For other fittings, rating decreases to 2250 PSI	Reel Qty (ft) 225-300	Reinforcement Material Wire	Supplier Part Number GH793-12R250	Tube Material Nitrile	Alternate Part Numbers Alternate Part Number C1CX69, Alternate Part Number GH793-12-100, Alternate Part Number GH793-12-50, Alternate Part Number MI-00352074, Alternate Part Number MINO-00015F86354	Product Weight 0.75 lbs

Similar Products

Model Number	Hose I.D.	Hose O.D.	Maximum Operating Pressure	Minimum Bend Radius	Reel Qty (ft)	Operating Pressure Note	Burst Pressure Note
GH793-16R150 Double Wire Braid 100R2AT Hose	1	1.5	2500	12	125-200	Rating applies for Global fittings only. For other fittings, rating decreases to 2000 PSI	Rating applies for Global fittings only. For other fittings, rating decreases to 8000 PSI
GH793-4R500 Double Wire Braid 100R2AT Hose	0.25	0.6	5750	4	450-550	Rating applies for Global fittings only. For other fittings, rating decreases to 5000 PSI	Rating applies for Global fittings only. For other fittings, rating decreases to 20000 PSI
GH793-6R500 Double Wire Braid 100R2AT Hose	0.38	0.75	5000	5	450-550	Rating applies for Global fittings only. For other fittings, rating decreases to 4000 PSI	Rating applies for Global fittings only. For other fittings, rating decreases to 16000 PSI
GH793-8R500 Double Wire Braid 100R2AT Hose	0.5	0.87	4250	7	450-550	Rating applies for Global fittings only. For other fittings, rating decreases to 3500 PSI	Rating applies for Global fittings only. For other fittings, rating decreases to 14000 PSI
GH793-10R250 Double Wire Braid 100R2AT Hose	0.62	0.98	3625	8	225-300	Rating applies for Global fittings only. For other fittings, rating decreases to 2750 PSI	Rating applies for Global fittings only. For other fittings, rating decreases to 11000 PSI

Product Questions & Answers (5)

Question by: Dustin R on Nov 6, 2025, 1:19 PM

got a -12 line on a piece of equipment, is this hose actually 3/4 inch inside diameter?

Answer by: Customer Support on Nov 7, 2025, 3:35 PM

dash size -12 on this one corresponds to a 0.75 inch hose I.D. The listed hose O.D. is 1.16 inches, so make sure you’ve got room for the outside diameter too.

Question by: Ralph B on Aug 9, 2025, 9:12 PM

Running a double wire braid on a petroleum-based hydraulic system and need to confirm the temp range before I swap out the old hose. What's this one rated for?

Answer by: Customer Support on Aug 11, 2025, 9:56 AM

Cold end holds down to -40°F and the upper limit tops out at 212°F. For most petroleum-based hydraulic systems running in normal operating conditions, that range covers a pretty wide spread of environments without issue. The nitrile tube and synthetic rubber cover are both suited for petroleum and water-glycol base fluids, so you're in good shape on the fluid compatibility side as well.

Question by: Ralph H on Jan 1, 2026, 3:45 PM

Can this hose handle hydraulic fluid with water-glycol in it, or is it just for oil-based stuff?

Answer by: Customer Support on Jan 3, 2026, 3:40 PM

This hose is designed for hydraulic systems using either petroleum-based fluids or water-glycol mixtures, plus lubricating oils and water.

Question by: Johnny H on Jan 17, 2026, 10:00 AM

got a piece of equipment that runs petroleum based hydraulic oil, is this GH793 hose ok with that stuff

Answer by: Customer Support on Jan 19, 2026, 7:06 AM

For hydraulic systems running petroleum base fluids, this hose is a match. It is also listed for use with water glycol base fluids, lubricating oils, and water.

Question by: Troy O on Mar 2, 2026, 9:07 AM

what fluids is this hose rated for? got a system running water-glycol and want to make sure it'll hold up before i order

Answer by: Customer Support on Mar 4, 2026, 6:19 AM

Water-glycol base fluids are explicitly listed as compatible with this hose, along with petroleum-based hydraulic fluids and lubricating oils. The 3/4 inch ID and 2-ply braid construction are well suited to those kinds of systems, so you're in good shape there.

Double Wire Braid SAE 100R2AT Hose, 0.75 Inch ID, Up to 3125.00 PSI

Description & Features

Specifications

Related Documents

Similar Products

Product Questions & Answers (5)