SAME DAY SHIPPING
— Order by 2pm EST.
Toggle Nav
Cart
Search
main product photo

E-Z Clip Series Fitting, -10 Hose Splicer

Ask A Question

Description & Features

The E-Z Clip Series Fitting -10 Hose Splicer by Danfoss Power Solutions (II LLC Aeroquip) is a reliable and efficient solution within the Special Products category. Designed for use with multi-refrigerant hoses it features a hose size of -10 and does not require a mandrel.

Its dual male ends sized at 0.63 inches each make it versatile for various line hose and tube applications. The fitting ensures no leaking crimps and eliminates guesswork making it a dependable choice in maintaining system integrity. This fitting requires no power supply and is user-friendly even in compact spaces.

Supplier Part Number: FJ3045-1010S

MPN: FJ3045-1010S

Installation is simplified with the included step-by-step guide utilizing components like clip closing pliers and refrigerant oil. The use of Aeroquip's specific rubber compound in the o-rings guarantees a secure and long-lasting connection. Note that E-Z Clip components are not reusable ensuring the highest standards of safety and reliability.

Featuring the exclusive E-Z Clip technology this fitting is ideal for specialized applications where precision and ease of use are paramount.

Specifications

Brand
Danfoss
a Dimensions
5.68 in
Compatible Hose ID
0.62 in
Connection Size 1
5/8 in
Connection Size 2
5/8 in
Connection Type
Hose
Connection Type 1
Hose
Connection Type 2
Hose
Construction Style
Reusable
Cut-Off Factor
2.583 in
d Dimensions
2.58 in
Dimensions
5.68 in L x 0.63 in W x 0.63 in H
End Gender 1
Male
End Gender 2
Male
End Size 1
0.63 in
End Size 2
0.63 in
Finish
Zinc-Plated
Fitting Type
Splicer
For Use With
E-Z Clip System A/C Refrigeration GH134 Series Hoses
Hose Dash Size
10
Inside Diameter
0.37 in
Material
Steel
Material Construction
Carbon Steel
Seal Material
HNBR
Seal Part If Included
1F40106-10
Series
FJ3045 Series
Sg 1 Cut The Hose
Cut the Hose to Proper Length. Be Sure the Cut is Made Square to the Hose Length
Sg 2 Slip On Two Clips
Install Two Proper-Sized Clips Onto the Cut End of the Hose
Sg 3 Oil The Nipple
Lubricate the Nipple with a Generous Amount of the Refrigeration or A/C System's Compressor Oil. This Must be Done to Lower the Force of Nipple Insertion
Sg 4 Insert The Nipple Into The Hose
Insert the Nipple into the Hose. There Should be No Gap Between the End of the Hose and the Shoulder on the Nipple. Avoid Kinking or Damaging the Hose While Inserting Nipple
Sg 5 Snap On The Cage
Snap the Cage into the Groove on the Nipple. When the Cage Has Been Correctly Installed in the Cage Groove, the Cage Will be Able to Rotate in the Groove
Sg 6 Slide The Clips
Slide the Clips Over the Cage Arms and into the Channels on Each Arm
Sg 7 Close The Clips
Use the FT1357 Clip Closing Pliers to Close the Clips. The Pliers Should be Positioned Squarely on the Clip Connection Points and Should Remain Square During the Closing of the Clip
Sg Caution
Failure to Follow these Assembly Instructions and/or the Use of Aeroquip® Hose with Fittings Supplied by Other Manufacturers May Result in Unreliable and Unsafe Hose Assemblies, Which May Result in Sudden or Unintended Escape of Refrigerant Gases. Persona
Sg Material
Clip Closing Pliers (FT1357), Guillotine Blade (FT1356) or Equivalent Cutting Tool, Refrigerant Oil Compatible with Refrigeration or A/C System. GH134 Multi-Refrigerant Hose, Appropriately Sized Clips (2 per Fitting) and Cage, Nipple Assembly (The (2) Bla
Thread Sealant
Without Thread Sealant

Similar Products

Model Number Hose Dash Size d Dimensions Price Action
E-Z Clip Series Fitting, -06 Hose Splicer

FJ3045-0606S E-Z Clip Series Hose Splicer

06

1.58 in

E-Z Clip Series Fitting, -08 Hose Splicer

FJ3045-0808S E-Z Clip Series Hose Splicer

08

1.68 in

E-Z Clip Series Fitting, -12 Hose Splicer

FJ3045-1212S E-Z Clip Series Hose Splicer

12

1.57 in

Product Questions & Answers (2)

Question by: Pete P on Mar 21, 2026, 4:35 PM
got a -10 multi-refrigerant hose that needs patched in the middle. is this the right kind of splicer for that
Answer by: Customer Support on Mar 23, 2026, 6:49 AM
For joining two cut ends of a -10 multi-refrigerant hose, this E-Z Clip hose splicer is built for that job. It has dual male ends (0.63 inch each) and is meant for line, hose, and tube connections using the E-Z Clip method, with no mandrel and no power supply needed.
Question by: Wayne M on May 13, 2025, 11:27 AM
Got a busted section of multi-refrigerant hose and I need to splice it back together without hauling out a bunch of shop equipment. This fitting work for that kind of job on -10 hose?
Answer by: Customer Support on May 15, 2025, 6:19 AM
That's what this fitting is built for. Both ends are male, each sized at 0.63 inches, so you're joining two cut ends of -10 multi-refrigerant hose into one continuous run. No crimping machine, no mandrel, no power supply needed at all. You just need the FT1357 clip closing pliers, the appropriately sized clips and cage, and some refrigerant oil compatible with your system. The nipple goes in oiled up, the cage snaps into the groove, and the clips close down over the cage arms. Whole thing is mechanical and hand-tool driven.

Tell us what you need and we'll get back to you.

Fields marked * are required.