SAME DAY SHIPPING
— Order by 2pm EST.
Toggle Nav
Cart
Search
main product photo

Danfoss / Eaton E-Z Clip System A/C Refrigeration Products Kit

Ask A Question

Description & Features

The Danfoss / Eaton E-Z Clip System A/C Refrigeration Products Kit a versatile solution by Danfoss Power Solutions ensures efficient and reliable assembly for refrigeration and A/C systems.

The kit features easy-to-use Clip Closing Pliers (FT1357) and a guillotine blade (FT1356) or equivalent tool for precise cuts. The nipple assembly with two black o-rings is specifically designed to prevent leaks. The components are designed to be user-friendly allowing installation even in confined spaces without the need for a power supply.

To assemble cut the hose to the required length ensuring a square cut. Slide two clips onto the hose and lubricate the nipple with compatible refrigeration oil. Insert the nipple into the hose ensuring no gap remains. After snapping the cage into the groove on the nipple slide the clips over the cage arms and close them using the FT1357 pliers.

Note that E-Z Clip components are not reusable and incorrect assembly may lead to refrigerant leaks and potential injury. The materials include GH134 Multi-Refrigerant hose and appropriately sized clips ensuring compatibility and reliability.

Supplier Part Number: FF12139

MPN: C1EX93

Specifications

Brand
Danfoss
Segment Code
A
Sg 1 Cut The Hose
Cut the Hose to Proper Length. Be Sure the Cut is Made Square to the Hose Length
Sg 2 Slip On Two Clips
Install Two Proper-Sized Clips Onto the Cut End of the Hose
Sg 3 Oil The Nipple
Lubricate the Nipple with a Generous Amount of the Refrigeration or A/C System's Compressor Oil. This Must be Done to Lower the Force of Nipple Insertion
Sg 4 Insert The Nipple Into The Hose
Insert the Nipple into the Hose. There Should be No Gap Between the End of the Hose and the Shoulder on the Nipple. Avoid Kinking or Damaging the Hose While Inserting Nipple
Sg 5 Snap On The Cage
Snap the Cage into the Groove on the Nipple. When the Cage Has Been Correctly Installed in the Cage Groove, the Cage Will be Able to Rotate in the Groove
Sg 6 Slide The Clips
Slide the Clips Over the Cage Arms and into the Channels on Each Arm
Sg 7 Close The Clips
Use the FT1357 Clip Closing Pliers to Close the Clips. The Pliers Should be Positioned Squarely on the Clip Connection Points and Should Remain Square During the Closing of the Clip
Sg Caution
Failure to Follow these Assembly Instructions and/or the Use of Aeroquip® Hose with Fittings Supplied by Other Manufacturers May Result in Unreliable and Unsafe Hose Assemblies, Which May Result in Sudden or Unintended Escape of Refrigerant Gases. Persona
Thread Sealant
Without Thread Sealant
Tool Type
EZ-Clip System Kit

Product Questions & Answers (2)

Sign In Hover me Please sign in to submit a question
Question by: Billy G on Jul 18, 2025, 4:44 PM
these clips and the nipple assembly, once you put em together can you take it apart and reuse the pieces or is that a one-shot deal?
Answer by: Customer Support on Jul 20, 2025, 6:42 AM
Once assembled, the components are done. E-Z Clip parts are not reusable, so if you cut a hose too short or make an error during assembly, you'll need fresh components to start over. That's worth keeping in mind before you make your cut, because a square, accurate cut at the right length is the only way to get a reliable connection the first time through.
Question by: Steve A on Jul 14, 2025, 1:07 PM
Can you use this kit to fix leaks in your A/C?
Answer by: Customer Support on Jul 16, 2025, 6:13 AM
This kit is designed with a nipple assembly that includes two black o-rings, which are specifically included to prevent leaks in refrigeration and A/C systems.

Tell us what you need and we'll get back to you.

Fields marked * are required.