SAME DAY SHIPPING
— Order by 2pm EST.
Toggle Nav
Cart
Search
main product photo

FCR51 Series 3-Port Pressure Compensated Priority Flow Control Valves With Relief, Up To 90 GPM Regulated & 3000 PSI

Ask A Question

Description & Features

Application The FCR-51 full range pressure compensating variable flow control is designed so that the orifice area varies as the lever is rotated. Fluid travels past the variable orifice, through the compensator spool and then out the controlled flow port. The flow out of the CF port is proportional to the orifice area which can vary from closed to open. Once the pressure on the CF port increases above the relief setting, the relief valve opens and diverts flow to the EX port while maintaining pressure on the CF port. The EX port must be plumbed back to tank for the relief to function. The sum of the controlled flow and the excess flow equal the inlet flow, and as the controlled flow increases the excess flow decreases. Both outlets are pressure compensated by a spool that maintains a constant flow while adjusting for pressure. Hunting between a compensated pump and the valve is dampened with a dashpot on the compensator spool.
Features Precision ground chrome plated spool for long life. Diamond honed spool bore provides consistent spool fit with low leakage. Every valve is factory tested for shutoff, linearity, max. flow & pressure compensation. High lift ball spring relief valve.
Materials Cast iron body. Heat treated spools (Stainless steel available). Buna-N O-Rings (Standard).
Maximum Operating Pressure 3000 PSI.
Recommended Filtration 30 micron.

Products

Product Questions & Answers (1)

Question by: Danny K on Aug 3, 2025, 7:45 AM
What kind of filtration we talking about for this thing to run right?
Answer by: Customer Support on Aug 4, 2025, 8:14 AM
A 30-micron filter is recommended to keep the system clean and running smoothly.