SAME DAY SHIPPING
— Order by 2pm EST.
Toggle Nav
Cart
Search
main product photo

H Series Geroter Motor, 22.60 cu in/rev, 4 Bolt Mounting Flange, 1 in. Straight Keyed Shaft, 1/2 NPT Ports, Compact yet powerful|Extended bearing life|Increased shaft seal

Ask A Question

Description & Features

Manufactured by Danfoss Power Solutions II LLC. the H Series Geroter Motor offers high performance and reliability for a variety of industrial applications. Designed with a 4 bolt mounting flange and 1 in. straight keyed shaft this motor is suitable for agricultural augers harvesters seeders and industrial sweepers and floor polishers.

The displacement of 22.60 cu in/rev ensures efficiency while the 1/2 NPT ports facilitate seamless integration. Enhanced bearing life and improved shaft seal provide longevity and durability even under rigorous conditions.

Capable of a maximum case pressure of 1500 PSI and operating up to 180 F this motor stands out in demanding environments. Its torque rating reaches up to 407 newton metre supporting robust functionality. Minimum viscosity at operating temperature should be the higher of either 100 SUS or (20 x PSI)/RPM = SUS.

To optimize performance it is essential to perform a break-in run for approximately one hour at 30% of rated pressure before full load application. Use of premium quality anti-wear type hydraulic fluid is recommended and ensure filtration per ISO Cleanliness Code level 18/13.

MPN: 9

Supplier Part Number: 101-1008-009

Specifications

Brand
Danfoss
Bearing Type
Hydrodynamic Journal
Check Valve Function
Without Check Valve Function
Color
Black
Design Code
9
Dimensions
8.2 in L x 3.31 in W x 3.87 in H
Frame Size
370
Housing Material
Iron
Mounting Type
4-Bolt Square Flanged
Orbital Gearwheel Set
Standard
Orbital Gearwheel Set Type
Gerotor
Paint Information
Low Gloss Black Primer
Painted
With Painted
Port Location
Side, Aligned
Port Type
NPTF
Seal Material
NBR
Segment Code
A
Series
H Series
Shaft Size
1 in Dia
Shaft Type
Straight Woodruff Keyed
Valve Type
Spool

Product Questions & Answers (3)

Question by: Lynn H on Apr 24, 2025, 9:47 AM
what's the break-in procedure for this motor before putting it under full load?
Answer by: Customer Support on Apr 26, 2025, 6:53 AM
Run it for about an hour at roughly 30% of rated pressure before you throw a full load on it. Make sure the motor is filled with fluid before any load gets applied. Skipping that step or rushing through it can shorten the motor's life considerably, so it's worth taking the time upfront.
Question by: Roy S on Dec 18, 2025, 8:46 AM
What kind of machines does this motor typically run?
Answer by: Customer Support on Dec 20, 2025, 6:49 AM
This H Series motor works well in agricultural equipment like augers, harvesters, and seeders. It's also used in industrial sweepers and floor polishers.
Question by: Howard C on Nov 1, 2025, 11:00 AM
trying to swap out an old char-lynn motor on an auger. is this one the 4-bolt mount with a 1 inch straight keyed shaft?
Answer by: Customer Support on Nov 2, 2025, 1:14 PM
This motor is set up with a 4 bolt mounting flange and a 1 in straight keyed shaft. It also uses 1/2 NPTF dryseal pipe thread ports, so those are the key connection points to match up.

Tell us what you need and we'll get back to you.

Fields marked * are required.