SAME DAY SHIPPING
— Order by 2pm EST.
Toggle Nav
Cart
Search
main product photo

Hose Protective Fire Sleeve, 2.88 Inch ID

Ask A Question

Description & Features

The Hose Protective Fire Sleeve is developed by Danfoss Power Solutions (II LLC Aeroquip) and is tailored for the rigorous demands of hose protection applications. This product features a resilient, single-layer construction of braided fiberglass tubing, meticulously impregnated with flame-resistant silicone rubber.

Designed to safeguard hoses against direct flame, this fire sleeve offers a minimum working temperature of -65 degrees. With an inner diameter of 2.88 inches, it is a reliable choice for industries requiring robust hose protection solutions.

For optimal performance, each hose assembly necessitates two clamps (model FF9217-0664S), ensuring secure installation.

MPN: EAR99

Supplier Part Number: 624-46

Specifications

Accessories
Clamp (2 Required Per Hose Assembly): FF9217-0664S
Battery Included
No
Brand
Danfoss Power Solutions (II LLC Aeroquip)
Brand
Aeroquip
Pack Size
12.00
UOM
FT
I.D.
2.88 in
Machine Mountable
No
Minimum Working Temperature
-65
Supplier Part Number
624-46
Product Weight
5.51 lbs
Alternate Part Numbers
Alternate Part Number C1MZ69, Alternate Part Number MINO-00015F51218

Related Documents

Similar Products

Model Number Accessories I.D. Price Action
Hose Protective Fire Sleeve, 1.50 Inch ID

624-24 Hose Protective Fire Sleeve

Clamp (2 Required Per Hose Assembly): FF9217-0648S

1.5 in

Hose Protective Fire Sleeve, 2.38 Inch ID

624-38 Hose Protective Fire Sleeve

Clamp (2 Required Per Hose Assembly): FF9217-0648S

2.38 in

Hose Protective Fire Sleeve, 2.88 Inch ID

624-46 Hose Protective Fire Sleeve

Clamp (2 Required Per Hose Assembly): FF9217-0664S

2.88 in

Hose Protective Fire Sleeve, 0.81 Inch ID

624-13 Hose Protective Fire Sleeve

Clamp (2 Required Per Hose Assembly): FF9217-0622S

0.81 in

Hose Protective Fire Sleeve, 0.88 Inch ID

624-14 Hose Protective Fire Sleeve

Clamp (2 Required Per Hose Assembly): FF9217-0622S

0.88 in

Product Questions & Answers (4)

Question by: Phil W on Jun 30, 2025, 4:27 PM
got a hose that measures right at 2.88 on the inside. is that the ID this sleeve is sized for?
Answer by: Customer Support on Jul 2, 2025, 7:39 AM
For sizing, the 2.88 inch ID is the inside diameter of the firesleeve itself, so it is meant to slip over a hose or coil where that sleeve ID is the fit you are after.
Question by: Lance G on Jun 17, 2025, 10:25 AM
fiberglass sleeve with silicone on it, does that mean it'll hold up if a hose runs right next to an exhaust manifold or open flame situation?
Answer by: Customer Support on Jun 18, 2025, 12:17 PM
Direct flame contact is exactly what this sleeve is built for. The braided fiberglass tubing is impregnated with flame resistant silicone rubber, so it acts as a barrier between the hose and the heat source rather than just slowing things down. It won't catch or sustain a flame, which matters a lot when you've got hydraulic lines running anywhere near ignition risk.
Question by: Dwight W on Jun 24, 2025, 4:04 PM
Reckon this fire sleeve will hold up if it's right next to a hot engine manifold?
Answer by: Customer Support on Jun 26, 2025, 6:33 AM
This hose fire sleeve is made to handle high heat, with a silicone rubber coating over braided fiberglass. It's rated for a minimum working temperature of -65 degrees Fahrenheit, so it should offer good protection near an engine manifold, but make sure you use the right clamps for a secure fit.
Question by: Judy C on Sep 13, 2025, 5:23 PM
got a 2.88 id sleeve here, what’s it actually made of and what’s it for?
Answer by: Customer Support on Sep 15, 2025, 12:49 PM
Built for hose protection in flame exposure, it uses a single layer of braided fiberglass tubing that is impregnated with flame resistant silicone rubber to help shield the hose from direct flame.