SAME DAY SHIPPING
— Order by 2pm EST.
Toggle Nav
Cart
Search
main product photo

Hose/Tube Cleaning Projectile For 1.57 Inch ID

Ask A Question

Description & Features

The Ultra Clean Tech Corp cleaning projectile, designed with a precise 1.5748-inch ID, ensures optimal maintenance for various systems, including hydraulic and pneumatic lines, fuel lines, food and beverage lines, steam pipes, heat exchangers and condensers, and air conditioning and refrigeration systems.

The launcher unit is equipped with a locking faceplate that pivots away for effortless nozzle size changes. O-Ring seals offer reliable sealing, and the air inlet port comes with a quick disconnect coupling. The trigger mechanism enables easy firing of the projectile.

Nozzles are offered in four basic stylesmdash;hose & pipe, JIC, tube, and BSPmdash;to ensure compatibility with different fittings. Operating within a pressure range of 85 to 150 PSI, it is crucial that the projectile's OD is approximately 20% larger than the ID for cleaning diameters of 2 inches or less.

For information on launcher and nozzle options or application assistance, please contact us.

Supplier Part Number: UC40

Specifications

Brand
Ultra Clean®
Diameter
1.5748 in ID
Series
UC Series
Sg Launcher Unit
Locking Faceplate Pivots Away from Body for Easy Nozzle Size Change, O-ring Seals are Used for Positive Sealing, Air Inlet Port with Quick Disconnect Coupling, Trigger Mechanism for Firing Projectile
Sg Nozzles
A Wide Range of Nozzle Sizes are Available in Four Basic Styles, Hose and Pipe - the Nozzle is Inserted into the Hose or Pipe, JIC - the Male Flared End of the JIC Nozzle Butts Against the Female Flare of the Hose or Tube Fitting, Tube - the Nozzle is Ins
Sg Sizing
To Clean an ID of 2 in or Less, the OD of the Projectile Should be Approximately 20% Larger than the ID if ID is Larger than 2 in, Projectile Should be Approximately 10% Larger than the ID (Individual Circumstances May Require A Smaller or A Larger Projec
Suitable For Use With
1-1/4 in ID Hoses and H32OD Tubes/Pipes

Similar Products

Model Number I.D. Nozzle Package Qty. Price Action
Hose/Tube Cleaning Projectile For 0.28 Inch ID

UC07 Hose/Tube Cleaning Projectile

0.2756 in

For Hose ID: 1/4, For Tube/Pipe OD: H06

100

Hose/Tube Cleaning Projectile For 0.87 Inch ID

UC22 Hose/Tube Cleaning Projectile

0.8661 in

For Hose ID: 5/8, For Tube/Pipe OD: H16

100

Hose/Tube Cleaning Projectile For 1.02 Inch ID

UC26 Hose/Tube Cleaning Projectile

1.0236 in

For Hose ID: 3/4, For Tube/Pipe OD: H19

50

Hose/Tube Cleaning Projectile For 1.30 Inch ID

UC33 Hose/Tube Cleaning Projectile

1.2992 in

For Hose ID: 1, For Tube/Pipe OD: H25

40

Hose/Tube Cleaning Projectile For 1.97 Inch ID

UC50 Hose/Tube Cleaning Projectile

1.9685 in

For Hose ID: 1-1/2, For Tube/Pipe OD: H38

20

Hose/Tube Cleaning Projectile For 2.36 Inch ID

UC60 Hose/Tube Cleaning Projectile

2.3622 in

For Hose ID: 2, For Tube/Pipe OD: H50

15

Hose/Tube Cleaning Projectile For 0.24 Inch ID

UC06 Hose/Tube Cleaning Projectile

0.2362 in

For Hose ID: 3/16, For Tube/Pipe OD: H06

100

Hose/Tube Cleaning Projectile For 2.76 Inch ID

UC70 Hose/Tube Cleaning Projectile

2.7559 in

For Hose ID: 2-1/2, For Tube/Pipe OD: H50

15

Hose/Tube Cleaning Projectile For 1.42 Inch ID

UC36 Hose/Tube Cleaning Projectile

1.4173 in

For Hose ID: 1-1/8, For Tube/Pipe OD: H25

40

Product Questions & Answers (2)

Question by: Tony B on Jan 8, 2026, 6:26 PM
got a 1.57 inch inside diameter line im trying to clean, is the UC40 the right size projectile or am i off?
Answer by: Customer Support on Jan 9, 2026, 8:24 PM
For a 1.57 inch I.D., the UC40 matches up with an I.D. spec of 1.5748 inches, so it’s in the right neighborhood for that size line. The sizing guidance for 2 inches I.D. and under is to run a projectile O.D. about 20 percent larger than the I.D., so the best fit depends on how the projectile size you’re using compares to your actual measured I.D.
Question by: Brett F on Oct 31, 2025, 8:38 PM
how do i know what size projectile to get for my hoses? mine are 1.57 inch ID but i wasn't sure if this one's right or if i need to go bigger
Answer by: Customer Support on Nov 2, 2025, 1:41 PM
For hose IDs at or under 2 inches, the projectile's outer diameter should run about 20% larger than the inner diameter you're cleaning. This UC40 is sized specifically for a 1.5748-inch ID, so it fits right in that range. If you were working with something over 2 inches, the rule shifts to about 10% larger. One thing worth knowing: if the projectile won't leave the nozzle, it's too big, and if it passes through without doing much, it's too small. Should one ever get stuck, shoot a discharge from the opposite end to push it back out.

Tell us what you need and we'll get back to you.

Fields marked * are required.