SAME DAY SHIPPING
— Order by 2pm EST.
Toggle Nav
Cart
Search
main product photo

Mechanical Push Puller, 8.25 Inch Reach, Inch Spread

Ask A Question

Description & Features

SPX Hydraulic Technologies' Mechanical Push Puller delivers robust performance for removing and installing gears, bearings, pulleys, and other press-fitted parts. This versatile tool features an 8.25-inch maximum reach and a spread range of 2-1/8 to 7-1/4 inches, making it adaptable for various industrial applications. Its design allows for both pushing and pulling forces, adjustable by the position of the forcing nut relative to the cross block.

Optional leg kits enhance the tool's adaptability, offering extra long or short reach configurations. The Mechanical Push Puller is compatible with a wide array of threaded adapters and bearing pulling attachments, ensuring it meets diverse operational needs. For optimal performance, select the appropriate tonnage capacity and leg length based on your specific requirements.

SKU: 927

Supplier Part Number (MPN): 927

Alternate Part Numbers: C1JM98

Specifications

Brand
SPX-FLOW
grp How It Works
1, Determine If You Want the Tool's Forcing Screw to Push or Pull, 2, to Exert Pushing Force, the Forcing Nut Is installed Beneath the Cross Block, As Shown on Left, 3, to Cause the Forcing Screw to Pull, the Forcing Nut Is Placed on Top of the Cross Bloc
grp How To Order
Each Push-Puller's Specified Tonnage "capacity in Is Determined Using Its Standard Legs in Tension, Using Longer Legs, or A Setup in Which the Legs are in Compression, Will Reduce the "capacity in, Always Select the Largest "capacity in Puller and the Sho
Power Source
Manual
Screw Thread Size
3/4-16
Series
MP Series

Similar Products

Model Number Product Description Maximum Reach Maximum Spread Range (in) Screw Size (in) Notes Price Action
Mechanical Push Puller, 10.50 Inch Reach, Inch Spread

939 Mechanical Push Puller

SPX PUSH PULLER

10.5

7 - 16-1/4

Product Questions & Answers (2)

Question by: Rusty B on Feb 11, 2026, 9:55 AM
Can this puller handle different sized gears and bearings, or is it pretty limited?
Answer by: Customer Support on Feb 12, 2026, 9:30 PM
This mechanical push puller works with gears, bearings, and pulleys, and the spread can go from 2-1/8 to 7-1/4 inches.
Question by: Warren W on Mar 25, 2026, 7:10 PM
trying to pull a pulley off a shaft, will this one reach far enough and open wide enough?
Answer by: Customer Support on Mar 26, 2026, 7:53 PM
With the standard setup you get up to 8.25 inches of reach, and the legs adjust across a 2-1/8 inch to 7-1/4 inch spread. That range is meant for press-fitted parts like pulleys, gears, and bearings.

Tell us what you need and we'll get back to you.

Fields marked * are required.