Polyethylene Tubing, 0.25 OD, 0.04 Thick, 0.17 ID, Up To 200.00 PSI

Description & Features

This tubing is crafted from linear low-density polyethylene offering notable resistance to environmental stress cracks. With a 0.25 inch outer diameter 0.04 inch wall thickness and 0.17 inch inner diameter it operates safely up to 200 PSI.

Ideal for general low-pressure and low-temperature applications it is well-suited for instrumentation and food processing complying with FDA regulation 21 CFR 177.1520(c) for food contact.

The product withstands temperatures from -40deg;F to 150deg;F ensuring reliability under varied conditions. It also features a vacuum rating up to 28"Hg and a minimum bend radius of 1.25 inches.

FreelinWade's selection of materials enhances durability reducing risks associated with chemical exposure aging and vibration.

MPN: 1J-048-01

Supplier Part Number: 1J-048-01

Specifications

Brand
Freelin-Wade®
Color
Black
Hardness
50 Shore D
Inside Diameter
0.17 in
Material
Polyethylene
Material Construction
Polyethylene
Nominal Size
1/4 in

Similar Products

Model Number Nominal Size Inside Diameter Outside Diameter Length Color Wall Thickness Price Action
Polyethylene Tubing, 0.25 OD, 0.04 Thick, 0.17 ID, Up To 200.00 PSI

1J-048-10 Polyethylene Tubing

1/4 in

0.17 in

Natural

Polyethylene Tubing, 0.13 OD, 0.03 Thick, 0.06 ID, Up To 305.00 PSI

1J-109-10 Polyethylene Tubing

Natural

Polyethylene Tubing, 0.38 OD, 0.06 Thick, 0.25 ID, Up To 190.00 PSI

1J-074-10 Polyethylene Tubing

3/8 in

1/4 in

Natural

Polyethylene Tubing, 0.31 OD, 0.06 Thick, 0.19 ID, Up To 230.00 PSI

1J-077-10 Polyethylene Tubing

5/16 in

3/16 in

Natural

Polyethylene Tubing, 0.19 OD, 0.03 Thick, 0.13 ID, Up To 200.00 PSI

A43184 Polyethylene Tubing

0.12 in

Natural

FW BLK PE 3/8 X 1/4 X 100 FT BAG

1J-074-01

3/8 in

1/4 in

Black

FW NAT PE 1/2 X 3/8 100 FT BAG

1J-076-10

1/2 in

0.38 in

Natural

FW NAT PE 5/32(4MM) X .106(2.7MM) X 100 FT BAG

1J-189-10

0.11 in

Natural

Product Questions & Answers (3)

Question by: Billy Y on Dec 3, 2025, 6:45 PM
Is this tubing alright for, like, hooking up to a beer line in my homebrew setup?
Answer by: Customer Support on Dec 5, 2025, 6:55 AM
Yes, this tubing complies with FDA regulation 21 CFR 177.1520(c) for food contact applications, so it should work fine for that.
Question by: Rusty C on Oct 8, 2025, 6:33 AM
does this tubing hold up alright in food processing lines, or is it just rated for that on paper?
Answer by: Customer Support on Oct 10, 2025, 6:08 AM
FDA compliance here is the real deal, not just a label. The resin meets 21 CFR 177.1520(c) and also carries NSF51 certification, both of which are recognized standards for food contact applications. The linear low-density polyethylene used in this tubing was specifically chosen for its resistance to environmental stress cracking, which matters in food processing setups where fittings, vibration, and chemical exposure can wear tubing down fast. Rated to 150 degrees F on the high end and 200 PSI operating pressure, it handles general low-pressure food processing runs without issue.
Question by: Bonnie M on Jun 24, 2025, 11:08 AM
got a little 1/4" line run, is this the kind of tubing that’ll handle food processing stuff?
Answer by: Customer Support on Jun 25, 2025, 7:19 PM
For food contact work, this linear low density polyethylene tubing is a solid fit since it complies with FDA 21 CFR 177.1520(c) and also lists NSF51 compliance. It’s commonly used for instrumentation and food processing in low pressure, low temperature setups.

Tell us what you need and we'll get back to you.

Fields marked * are required.