Skip to the beginning of the images gallery

SALAMI VD12A-P01A-PRA.PRB-MLA-C2/S PARAL

Description & Features

Designed for demanding mobile and industrial hydraulic circuits, the Salami VD12A-P01A-PRA.PRB-MLA-C2/S Paral is a working section from the Salami VD12A Series, configured in parallel flow. It supports a maximum operating pressure of 4,000 PSI on the inlet port and up to 4,500 PSI on work ports A and B, with a back pressure limit of 363 PSI on the outlet port. Flow capacity reaches 48 GPM, making this section well-suited for high-demand directional control applications.

Compatible with mineral oil at a recommended viscosity of 12 to 75 cSt, with an acceptable range from 10 to 460 cSt, the section performs across fluid temperatures from -4°F to 185°F using standard NBR seals. Ambient operating temperature is rated from 86°F to 140°F. Recommended filtration is ISO 4406: 19/16, consistent with the contamination level used in factory testing at 16 cSt viscosity.

SKU: S22480410

Supplier Part Number (MPN): S22480410

Alternate Part Numbers: C1MV16, MI-02665670, MINO-00770X20175

Specifications

Brand Salami Hydraulics Na Inc	Brand Salami Hydraulics	Pack Size 1.00	UOM EA	Supplier Part Number S22480410	Alternate Part Numbers Alternate Part Number C1MV16, Alternate Part Number MI-02665670, Alternate Part Number MINO-00770X20175	Product Weight 14.00 lbs

Similar Products

Model Number	Product Description	Price	Action
322411332 VD12A Series Working Section	SALAMI VD12 02A M SPOOL
S22480410 VD12A Series Working Section	SALAMI VD12A-P01A-PRA.PRB-MLA-C2/S PARAL.
S22480670 VD12A Series Working Section	SALAMI VD12A-P06A-PRA.PRB-MLA-C2/S PARAL.

Product Questions & Answers (2)

Question by: Danny M on Aug 27, 2025, 8:32 AM

Running a high-flow directional control setup on some heavy equipment and need to know if this section can keep up. What's the actual flow capacity on this thing?

Answer by: Customer Support on Aug 28, 2025, 9:08 PM

Rated at 48 GPM, so it holds up well in high-demand applications. Pressure-wise, the inlet port handles up to 4,000 PSI, and the work ports A and B are rated even higher at 4,500 PSI. That combination makes it a solid fit for heavy mobile or industrial hydraulic circuits where you need both volume and pressure handled reliably in the same section.

Question by: Earl B on Dec 3, 2025, 3:34 PM

What kind of oil should I be running in this thing, and how thick can it be?

Answer by: Customer Support on Dec 5, 2025, 7:43 AM

Optimal performance from this Salami VD12A section calls for mineral oil with a viscosity between 12 and 75 cSt. It can handle viscosity as low as 10 cSt or as high as 460 cSt if needed.