Skip to the beginning of the images gallery

Salami CO FRICTION Kit

Description & Features

The Salami CO FRICTION Kit is designed for VD6A Series Working Sections. These cast-iron bodies can accommodate up to 8 work sections, offering parallel, series, and tandem circuits with load check valve protection on each section.

Spools are hardened steel and nickel-plated for durability and long service life, and are also interchangeable. Available controls include manual, cable, electric, electro-hydraulic, proportional hydraulic, pneumatic, and electro-pneumatic options.

This Salami product has a 12 GPM flow rating and can withstand a maximum operating pressure of 5100 PSI on ports P, A, and B.

SKU: R23400322

Supplier Part Number (MPN): R23400322

Alternate Part Numbers: C1MU20

Specifications

Key 3	Sg Fluid Viscosity 12 cSt to 75 cSt Optimal, 10 cSt Minimum, 400 cSt Maximum	Sg Internal Leakage 1.1 to 1.52 cu-in/min at 2285 psi	Sg Maximum Back Pressure 363 psi on Outlet Port T	Sg Recommended Filtration 19/16 um	Suitable For Use With VD6A C0 Series Hydraulic Proportional (IP) Control Directional Valves, VDM6 C0 Series Monoblock Directional Valves

Product Questions & Answers (4)

Question by: Brent J on May 17, 2025, 9:47 PM

Just want to make sure, this friction kit is for the Salami VD6A series valves, right?

Answer by: Customer Support on May 19, 2025, 6:22 AM

That's correct. This friction kit is specifically listed as compatible with the Salami VD6A series.

Question by: Earl R on Dec 9, 2025, 4:48 PM

got a VD6A valve stack, is this the right friction kit for it or am i lookin at the wrong thing

Answer by: Customer Support on Dec 11, 2025, 6:39 AM

The key detail is the model label tied to this kit. It’s listed for the Salami VD6A Series, with catalog number C1MU20 and supplier part number R23400322.

Question by: Roy E on Oct 16, 2025, 2:19 PM

what's the fluid temperature range on this kit, and does it hold up alright with standard seals?

Answer by: Customer Support on Oct 18, 2025, 1:24 PM

With the NBR seals that come standard, fluid temps anywhere from -4°F up to 185°F are within spec. That covers most working conditions you'd run into on typical hydraulic equipment. If your application runs hotter or colder than that range on a regular basis, you'd want to look at a different seal configuration, but for everyday mineral oil systems those limits are pretty generous.

Question by: Bonnie H on Feb 11, 2026, 3:58 PM

Can this friction kit handle hot weather, like if it's sitting in the sun all day?

Answer by: Customer Support on Feb 12, 2026, 8:25 PM

The Salami CO friction kit is rated to handle ambient temperatures from -22°F up to 140°F, and fluid temperatures up to 185°F with standard NBR seals. So, it should be fine in most sunny conditions.