Working section (T01A-PRA.PRB-NLA-C2), tandem circuit, 4-way 3-pos. A & B closed in neutral,spring centered to neutral (3), standard protected lever control (4), aux. valve plugs (5). SAE-8 work ports. Does NOT include M8 threaded handle.

This Salami VD6A Series working section features cast-iron bodies, with up to 8 work sections that can be combined. The T01A-PRA.PRB-NLA-C2 working section features a tandem circuit, 4-way 3-position valve with A & B closed in neutral, spring centered to neutral, and a standard protected lever control.

This section provides parallel, series, and tandem circuits with load check valve protection on each section, as well as open and closed center with power beyond options. The spools are hardened steel and nickel-plated and interchangeable. Spool selections include double acting, single acting, motor, cylinder, float, etc. Auxiliary valves are available for ports A and B. Several types of mid-inlet modules are available, as well as a venting valve. Controls are available in manual, cable, electric, electro-hydraulic, proportional hydraulic, pneumatic, proportional pneumatic, and electro-pneumatic configurations. SAE-8 work ports are included.

This valve section has a 12 GPM flow rating and a maximum operating pressure of 5100 PSI on ports P, A, and B. It is designed for a fluid viscosity between 10 cSt and 400 cSt, with optimal performance between 12 cSt to 75 cSt. The ambient temperature range is -22°F to 140°F, and the fluid temperature range is -4°F to 185°F with standard NBR seals.

SKU: S23480580

Supplier Part Number (MPN): S23480580

Alternate Part Numbers: C1MV24