Work module, 11.8 GPM pressure compensated, hydraulic proportional control (IP) + manual control (NL), double acting cylinder spool, work port valves plugged (PRA.PRB), SAE -10 ports.

Part of the Salami VDP08 Series, this load-sensing directional control valve working section delivers 11.8 GPM with pressure compensation, ensuring flow in each section remains dependent solely on spool position rather than load conditions. The double acting cylinder spool configuration supports a wide range of actuator applications, while work port valves are plugged (PRA, PRB) and connections are made via SAE -10 ports. Dual control capability is built in, combining hydraulic proportional control (IP) with manual control (NL) for operational flexibility.

Rated to 4,560 PSI on the pressure port and 5,000 PSI on work ports A and B, this section is designed for demanding hydraulic circuits. Fluid temperature range spans -4°F to 185°F with standard NBR seals, and optimal fluid viscosity falls between 12 cSt and 75 cSt. Maximum back pressure on the tank port is 145 PSI. Recommended filtration is ISO 4406: 19/16, with all technical data referenced at 16 cSt using mineral oil at ISO 4406 contamination level 19/16.

SKU: S24180103

Supplier Part Number (MPN): S24180103

Alternate Part Numbers: C1MW50